Caught between rolling powered vehicle and other object · Bruises, contusions
At a glance
Federal OSHA recorded a severe workplace injury
at VENTURE CORPORATION, Plant 3, Asphalt Plant, RUSSELL SPRINGS, KANSAS 67764
on — Bruises, contusions, affecting the thigh(s).
Final narrative
An employee was changing the motor on a four-bin feeder at the asphalt plant. A small backhoe was parked on ground that was sloped towards the feeder bin and an outrigger had been extended as a safety stop. The employee stepped into the bucket and weight was transferred to the front of the backhoe allowing the outrigger to come off the ground. The backhoe then rolled forward. The employee got caught between the backhoe and the feeder bin and sustained bruising to the upper leg.
An employee was working on the brake pads underneath a broom (equipment vehicle) when something fell and struck the employee. The employee suffered a broken right arm and was hospitalized.
The employee was in a front end loader attempting to lift a railroad tie. She lost her grip on the railroad tie and it fell striking her right hand, middle finger on the bucket blade. Her right middle fingertip was amputated.
On December 13, 2023, an employee was operating a forklift. When they stepped off the forklift, it crushed their left foot between the lift and a racking system. The employee suffered a foot fracture that required hospitalization.
An employee was maneuvering a motorized pallet jack while standing in front of it. He became pinned between the pallet jack and a steel rack cross-beam, resulting in a contusion to his chest/back and a fractured rib.
An employee was stacking empty drums into a trailer. The employee then exited the trailer, using the forks of a forklift as a step. The forklift's parking brake failed, causing the forklift to move forward and pin the employee's right leg between the forklift and the trailer. The employee's right lower leg was crushed, resulting in a fracture and a laceration.
An employee had been spraying weeds behind a school. As he was leaving the field, the employee drove his truck up to the gate, got out, and opened the gate. The truck rolled forward and pinned him against the fence/gate. The gate then gave way and opened from the force of the truck. The employee's left index fingertip got caught in the fence/gate and was amputated.
An employee was using a walk-behind tugger to pull a grinder. The employee's left little finger was pinched between the handle of the tugger and the framework of a staircase. The employee's fingertip was amputated.
More severe injuries in this industry (NAICS 237310)
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.