Dramco Tool Co., Inc.

Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.

An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.

An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.

An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.

An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.

An employee was using a box cutter when it cut the tip of his left thumb resulting in a fingertip amputation.

An employee was inspecting and packing parts when a machine in the area had a die malfunction. This die controls the flow of molten metal. Once it malfunctioned, the molten metal bled into the water line and started spraying into the area where the employee was located. The employee was hospitalized to treat burns to her arm, chest, and mouth.

An employee was loading components into fixtures on an automated CNC Line. He was moving a J-Hook lifting apparatus by hand from its storage location to the raw material area in order to pick up a piece of steel. The employee had the crane remote and the neck of the J-Hook apparatus in his right hand. When he went to set the J-Hook down on the floor, he placed his left middle finger inside of the lifting loop of the magnet. As he manually lowered the J-Hook to the floor by the neck, it fell. As the neck dropped to the floor, the magnet shifted and the lifting loop of the magnet retracted into the bracket of the J-Hook, fracturing and amputating the fingertip.

An employee was operating a two-handed punch press. When the foot pedal was actuated, the machine cycled and came down onto his left hand causing severe lacerations to the index, middle, and ring fingers to the bone.

An employee was cutting material on a band saw and amputated his left ring fingertip.

An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.

An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.

An employee was rappelling down a tree. When he was most of the way down, he fell on the ground and suffered a broken pelvis.

An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.

An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.