An employee was leaving the facility for the day. As the employee was about to exit the building, he stopped at a table that stores hand sanitizer and face masks. At the same time, the work platform adjacent to the table was struck by a transfer car that was being repositioned. When the transfer car struck the tower, it dislodged a service part (2" steel blind flange) from one of the platform levels, which then fell and struck the employee on the head. The employee sustained a laceration, contusion, and fracture to the head.
An employee was working in the forest flagging an area to be harvested. He took a step and his foot slipped on a stick hidden under the leaves, causing him to fall to the ground. He landed on his right foot/lower leg resulting in a fractured tibia.
An employee was inspecting an apartment to ensure it was ready for a new resident to move in. The carpet in the apartment had been recently cleaned and was still wet. As the employee went from the carpet to the tiled floor of the bathroom, they slipped and fell, resulting in a torn left hamstring.
An employee was delivering a letter along a rural carrier route when she stepped on an ice-covered snow drift, slipped, and fell to the ground. The employee sustained a right hip fracture that required surgery.
More severe injuries in this industry (NAICS 333298)
An employee was disassembling a scrap headliner above a dashboard to recover automotive parts when their screwdriver slipped and contacted their right hand. The employee suffered a laceration that resulted in nerve damage, requiring surgery.
An employee was assisting in the removal of a filter dryer assembly from a support stand. The filter dryer was attached to an overhead crane during the time the mounting bolts were being removed from the support stand. Once the filter dryer was completely disconnected from the support stand, the unit became top-heavy and tipped over onto the employee causing a fracture to their right foot and lacerations to their upper right arm and upper back.
An employee was removing a 2,700-pound piece of metal from a horizontal mill. They were walking away from the machine when they slipped and tried to catch themselves on the metal, causing the large piece of metal to fall down onto their ankle. They sustained a compound fracture to their right leg.
An employee was standing on an elevated, unsecured platform to assist with the rigging and removal of a vessel from a work area when the platform tipped and they fell to the concrete floor, fracturing their pelvis and elbow.
An employee was repairing a CNC machine. A tool fell from the operator platform into the pit area below, a distance of approximately 3.5 feet. The employee descended into the pit using the access stairs to retrieve the tool. The employee's feet slid out from under him while stepping onto the cover, resulting in a fall and a fractured left hip that required hospitalization.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.