Caught in running equipment or machinery during maintenance, cleaning · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Cleveland-Cliffs Inc., 1724 Linden Avenue, ZANESVILLE, OHIO 43701
on — Crushing injuries, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
Two operator technicians were processing side trim coils on a repair line when scrap on the north side became jammed in the scrap chute. The employee stopped the line and went to clear the scrap buildup as the other employee jogged the machine to realign the scrap for the other employee to remove. The injured employee's left hand was then caught on the scrap chopper and his left index, middle, and ring fingers were crushed.
HospitalizedFinger(s), fingernail(s), n.e.c.Metal, woodworking, and special material machinery, n.e.c.
An employee was attaching rigging to a mandrel sleeve during routine mandrel sleeve replacement. The employee fell 15 feet from a work platform to the ground. The employee was hospitalized with fractures to their eye socket, spine, and a rib.
A train operator was transporting carts of molten iron from the blast furnace to oxygen furnaces. He was working to couple four carts to two other carts while going around a slight curve on the track. A hard coupling event occurred causing molten iron to splash out of the carts and onto the employee. The employee sustained first-degree burns to the face and knees.
An employee and co-worker were participating in a hands-on alignment training of a device that consisted of an electric drive motor, a belt, pulleys, a chain, and sprockets. The employee finished checking the tension and alignment on the training aid and prepared to energize the device s motor to spin the chain and check their work. The device activated causing the injured employee s right ring finger to become caught between the chain and sprocket. The employee suffered a fingertip injury resulting in amputation down to the first joint.
An employee was carrying out a shrink-wrapping task. The employee's right little finger was pinched between a skid runner and a driven conveyor roll, causing an amputation to the finger.
An employee was cutting a roll of steel from a slitter machine when their arm became caught in the machine, resulting in compression injuries to their arm and hand that required hospitalization.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 331221)
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.
An employee was removing a roll (tooling) from a machine when their left little finger was pinched between the roll and the machine, resulting in a partial amputation.
An employee was rolling a piece of steel in the belt of a shape roller machine when his finger was pinched between two pieces of steel. His right ring and middle fingers were amputated.
An employee was cutting a length of steel coil when he noticed the steel might have cross-break defects. He used his gloved hand to feel for and clean the defected spots when his glove got caught in the measuring wheel, which rolls along the top of the steel to ensure accurate cuts. The employee's arm was pulled down into the machine until his body was stopped by a support bar that goes across the machine. The employee's arm was fractured at the elbow and required hospitalization.
An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.