Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Phoenix Converting, Inc., 1500 W. Bryn Mawr Ave, ITASCA, ILLINOIS 60143
on — Heat (thermal) burns, unspecified, affecting the upper extremities, unspecified.
Final narrative
An employee was cleaning the inside of a laminator machine when their arm was caught, resulting in a burn and hospitalization.
HospitalizedUpper extremities, unspecifiedSpecial process machinery, n.e.c.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 326111)
At about 11:00 a.m. on August 17, 2025, a Sealer Air Corp. employee suffered a broken right tibia while stepping down from a conveyor to the floor 19 inches below.
An employee was troubleshooting around the secondary draw rollers of a bag machine when their left index, middle, and ring fingers contacted the rollers. The employee sustained a partial fingertip amputation to one of the fingers. The machine was not guarded at the time.
An employee was clearing a jam from the rewinder when their hand was pulled into a rotating part of the machine, fracturing one finger and dislocating another.
An employee was stepping down from a two-step ladder when the ladder slipped out from underneath them. The employee fell and landed on a sidekick trailer jack, resulting in four fractured ribs, including two ribs with multiple breaks, and a pulmonary contusion.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.