Allen and Companies, LLC

An employee was transitioning from a ladder onto a roof when the ladder slipped and they fell approximately 20 feet to the ground. The employee was hospitalized with fractures to their pelvis and heel.

An employee was tearing down shingles when they fell approximately 18 feet from a roof to the ground, sustaining a broken ankle.

An employee was climbing a ladder to bring material onto a roof. The ladder slid and the employee fell 16 feet to the ground, resulting in a broken knee.

An employee was performing an inspection of a bridge crane while working from a 19-foot scissor lift. The employee was going to use a pendant to move the crane to access a different portion of the crane for visual inspection. The scissor lift guard rails were below the girder of the crane to avoid contact. The tow arm for the crane collectors contacted the guardrail of the scissor lift and caused it to tip over. The employee stayed inside the scissor lift basket as he fell to the floor. The employee sustained fractures to the right arm and hip.

An employee was on a forklift that was elevated approximately 20 feet and was auditing inventory. The forklift malfunctioned and the employee fell down to the surface below, causing them to sustain multiple fractures.

A temporary employee was performing a two-person projection welding task to add a hinge reinforcement to a hollow steel door. He was positioning the hinge reinforcement while his supervisor held the door to maintain alignment. When the foot pedal was actuated, the electrode partially amputated the employee's left ring finger.

An employee was stacking bundles (12 feet long, 21 inches high) of aluminum extrusions (weighing 28 pounds each). After three bundles had been successfully stacked, the fourth tipped over when it was partially complete. It landed on the employee's right ankle/leg and broke the tibia. The employee was hospitalized.

An employee was adjusting the rollers on the mill feeder when their right thumb was crushed between two rollers, resulting in amputation of the thumb tip.

An employee was operating a core drill to bore through concrete at an active construction site. The equipment struck embedded rebar in the concrete, causing the handle to kick back and strike the employee's ribs. The employee was hospitalized with a fractured rib and a punctured lung.

An employee was loading pallets onto a truck and climbed down off a pallet after loosening straps to release the crane. The employee slipped off the flatbed truck and fell 4 feet to the dock plate/ground. The employee was hospitalized with a brain bleed and fractures to their T4, T5, and T6 vertebrae.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.