NORTH CANTON, OHIO—
The Timken Company
Other fall to lower level 11 to 15 feet · Cuts and abrasions or bruises
At a glance
Federal OSHA recorded a severe workplace injury at The Timken Company, 4500 Mt. Pleasant St, NW, NORTH CANTON, OHIO 44720 on — Cuts and abrasions or bruises, affecting the nonclassifiable.
Final narrative
An employee was attempting to close an outlet valve due to a power outage. He stepped over an angle iron and fell 12 feet into an open coolant pit filled with 3-4 feet of machine coolant. The employee was hospitalized with lacerations, bruises, a muscle injury, and fatigue.
More severe injuries at The Timken Company
BUCYRUS, OHIO—
The Timken Company
An employee's left middle finger was pinched between a hopper and its lid, resulting in amputation of the fingertip.
BUCYRUS, OHIO—
The Timken Company
An employee was driving a tow motor down an aisle. Her tow motor crashed into another one, which was stopped at an intersection, and her left leg was crushed between the two tow motors. Her lower leg was injured and she was hospitalized.
BUCYRUS, OHIO—
The Timken Company
On or about March 15, 2016, an employee was attempting to remove a bearing from a conveyor when his finger was pinched between a metal gate and the conveyor, partially amputating his left ring fingertip.
View The Timken Company's full OSHA safety record →
Similar incidents · Same event type
DEERFIELD, MISSOURI—
ADM
The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.
MENTONE, TEXAS—
International Game Technology
An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.
JACKSONVILLE, FLORIDA—
WW Gay Mechanical Contractor, Inc.
An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.
CANAAN, CONNECTICUT—
Konecranes, Inc.
An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.
BROOKVILLE, PENNSYLVANIA—
Maximus Group
An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.
More severe injuries in this industry (NAICS 331110)
LEVITTOWN, PENNSYLVANIA—
Floworks International LLC
An employee fell while entering the building. The employee was hospitalized with a fractured ankle and required surgery.
OSCEOLA, ARKANSAS—
Big River Steel, LLC
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
PEORIA, ILLINOIS—
Keystone Consolidated Industries, Inc.
An employee was working to close a furnace door. The hydraulic mechanism that opens and closes the furnace door was non-operational and had been disconnected to allow the furnace door to be opened manually. As the employee was releasing the pins that held the door open, the door and the hydraulic cylinder fell, pinching their left hand between the hydraulic cylinder's base plate and the furnace. The employee suffered amputation of the little fingertip.
SEGUIN, TEXAS—
Commercial Metals Company
A rolling mill was shut down due to a cobble between two mill stands. The injured employee was cleaning the cobble from the delivery side of stand A, while another employee went to the control panel to move stand B and stand A moved instead. The injured employee's right thumb got caught between the delivery guide of stand A and the looper trough. The tip of his thumb required surgical amputation to the bone to allow for stitches.
BEAVER DAM, WISCONSIN—
Metalcraft of Mayville, Inc.
An employee was helping another employee load stock material onto a press brake when the stock slipped. The injured employee's right index finger was caught between the press brake die and the stock, resulting in amputation at the first knuckle.
More severe injuries in OHIO
DAYTON, OHIO—
United States Postal Service
An employee was working to deliver mail to an apartment building. She was waiting for a customer to move, to obtain clearance to the mailboxes. The door swung inward and closed on her right little finger. The top half of her finger was surgically amputated.
COLUMBUS, OHIO—
Foundation Steel, LLC
An employee fell from a step ladder while reaching for a tie-off point. He impacted the ground, and landed on his bolt bag which contained tools. The employee was hospitalized with fractured ribs, and a lacerated spleen and kidney.
LIMA, OHIO—
GXO Logistics
On October 30, 2025, an employee was working to adjust a stackable metal shipping container. As the container dropped into place, it caught the employee's hands in an area between the upper and lower cross-members. The employee suffered a laceration to the left ring finger that required stitches, bruising to the right ring finger, and fractures to the right middle finger that necessitated medical amputation of the fingertip.
CANTON, OHIO—
Abbott Electric Inc
An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.
COLUMBUS, OHIO—
American Electric Power Company
An employee was setting up communication equipment for a meeting. They were walking and tripped over a speaker on the ground. The employee sustained a leg injury.