TYSON FOODS

An employee was trimming beef when the knife came out of his hands and punctured his abdomen as he went to grab it. The employee sustained an open abdominal wound with no internal injuries.

An employee was rigging two hooks together that were attached to a pallet and pulled by a forklift. The employee's finger slid under the secondary hook attached to the forklift and sustained a left index fingertip amputation.

An employee was helping mechanics remove a piece of iron from an airlock. The employee was approximately 3 feet up on a ladder when he dropped a wrench, which struck the handle of the steam line valve. The valve opened and steam sprayed onto the employee, causing burns to both inner thighs and his lower abdomen.

An employee was bending over, setting up a pallet on the floor. As she stood up, she lost balance, slipped, and fell to the floor, sustaining a fractured right ankle.

An employee tripped on the edge of the sidewalk while walking into work and fell to the concrete. The employee was hospitalized with a fractured arm.

An employee was fixing ceiling tiles while working from a ladder when they fell to the floor and sustained a hip fracture.

An employee was on an A-frame ladder retrieving materials from a shelf. He slipped and fell and his leg got caught in the ladder rungs, breaking his left tibia.

An employee was unloading materials from a flatbed trailer when they fell from the trailer and landed on the ground. The employee sustained a fractured left leg.

An employee was unloading appliances at a customer location for delivery. The employee was moving a water heater to be placed on the liftgate when he stepped backward and fell to the ground. The employee sustained rib and back injuries.

An employee was coming down a portable ladder when they slipped and fell to the ground, resulting in a right forearm fracture.

An employee was working next to a 12-inch, 21-foot-long pipe that was being lowered using a 1-ton chain fall. The chain fall slipped, causing the steel pipe to drop. It struck his left hand, causing the partial amputation of the ring fingertip and the loss of the fingernail.

Three employees were reorganizing a work area by staging material-handling tables. Two employees were pushing a table while the third employee guided it. The table became stuck on the wheel of another nearby table and while the two employees tried to push it free, the third employee moved the other table. The newly freed table moved forward into the other table, and the third employee's right middle finger was caught between the two. A third of the fingertip was amputated.

An employee was fabricating an evaporator fixture. The fixture was sitting on a table and the employee was utilizing a hoist and chain sling hooks to elevate one side of the fixture into position to weld a piece on it. The hoist moved slightly on the bridge trolley, creating slack in the chain that caused one of the legs of the sling to come out of the square tubing. The evaporator fixture came down onto the employee's right ring finger, pinning it against the table. The employee's finger was partially amputated and was later surgically amputated above the knuckle.

An employee was operating a shear when its blade came down and amputated his left middle and ring fingertips. The machine was guarded at the time.

An employee was removing material from a pallet rack using a standup forklift when an upper shelf was knocked out of place causing a pallet of industrial fans to fall 12-15 feet. The employee was struck by the falling pallet. The employee sustained a laceration to the front-right of their head and fractures to three vertebrae.

An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.

An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.

An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.

Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.

An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.