Caught in running equipment or machinery, n.e.c. · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Conagra Brands, Inc., W8880 County Rd X, DARIEN, WISCONSIN 53114
on — Amputations, affecting the upper arm(s).
Final narrative
An employee was inspecting a sorter conveyor. The employee was pulled into the roller, resulting in fractures and degloved skin on the forearm that required hospitalization and surgery. The injury required amputation of the arm below the elbow.
An employee was called over to the dinner line due to a black substance under the rotary. The employee was cleaning the black substance from the discharge hole of the rotary when their fingers were struck by the rotary cups. The employee sustained amputation injuries to the middle and ring fingers on their left hand.
On February 10, 2025, an employee was servicing an exhaust fan when its belt caught the employee's glove and pulled it through the pulley. The employee's right little fingertip was amputated.
An employee was reversing a forklift out of the raw meat operation area when her left elbow was caught between the forklift and a stainless steel bollard. The employee sustained multiple fractures to the elbow.
An employee was exiting a room and caught her right thumb in the hinged side of the door, resulting in amputation of approximately two centimeters of her thumb tip.
An employee's left-hand fingers were pulled into the chain and sprocket on a horizontal conveyor. All four fingers were lacerated, and the index and little fingers required partial medical amputations.
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 311411)
An employee was troubleshooting to determine why a pallet was not traveling along a continuous vertical conveyor. The conveyor's rollers caused a crushing/laceration injury to the employee's right hand that required surgery.
An employee was operating a pallet end rider when it struck a rack. The employee's right foot was pinned and fractured between the forklift and the rack.
An employee was putting a machine guard back onto a chain and sprocket when their left middle finger became caught in the chain and sprocket. The employee sustained an amputation of the fingertip.
An employee was changing out a hose on a chemical tote. The fitting for the tote disengaged and the employee was exposed to peracetic acid that caused chemical burns and respiratory distress.
An employee was helping to dismantle an old piece of equipment (descrambled bottle machine) when a metal plate fell and pinched his left middle finger against the wall. The employee sustained a severe laceration that required surgery and amputation.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
An employee was using a vertical band saw to cut a thick piece of rubber material. While being cut, the material shifted, causing the employee s right hand to contact the moving blade. The employee's thumb was amputated below the knuckle. The employee was hospitalized, undergoing surgery.
A production sanitation employee was pre-rinsing an incline conveyor and noticed cheese stuck between the belt idler. The employee went to remove the cheese and their glove got caught and pulled their left forearm into the conveyor. The employee's arm was fractured. The machine was not locked out/tagged out at the time.
An employee was on a ladder, taking measurements for a new gutter installation. The ladder slipped out from under him and both he and the ladder fell to the ground. He was hospitalized with seven broken ribs and a broken clavicle.
An employee was unloading a truck for a delivery job. While moving boxes in the truck, the employee tripped over a pallet and fell out of the truck to the ground, resulting in four broken ribs.