ConAgra Brands, Inc.

An employee was called over to the dinner line due to a black substance under the rotary. The employee was cleaning the black substance from the discharge hole of the rotary when their fingers were struck by the rotary cups. The employee sustained amputation injuries to the middle and ring fingers on their left hand.

On February 10, 2025, an employee was servicing an exhaust fan when its belt caught the employee's glove and pulled it through the pulley. The employee's right little fingertip was amputated.

An employee was exiting a room and caught her right thumb in the hinged side of the door, resulting in amputation of approximately two centimeters of her thumb tip.

An employee was inspecting a sorter conveyor. The employee was pulled into the roller, resulting in fractures and degloved skin on the forearm that required hospitalization and surgery. The injury required amputation of the arm below the elbow.

An employee's left-hand fingers were pulled into the chain and sprocket on a horizontal conveyor. All four fingers were lacerated, and the index and little fingers required partial medical amputations.

An employee was moving a scissor lift through a doorway. The employee was pinned between the scissor lift and the doorframe, sustained a back injury, and was hospitalized.

A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.

An employee was inspecting the overhead area of a single-person lift and repositioning the lift through a double doorway. As they were transitioning through the doorway, they were caught between the doorframe and the vertical mast of the lift. The employee was hospitalized with injuries to the nose, left maxillary sinus, left orbital bone, and left jaw, with fractures at the maxillary sinus area.

An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.

An employee was operating a stand-up forklift. The forklift drove into a rack in a warehouse, and the employee's right hand was caught between the rack and an upright supporting the forklift's overhead guard. The employee suffered a fracture and laceration to the hand, just below the little finger.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.

An employee was walking on top of boiler to close a valve. The employee fell off the boiler and landed on the floor, sustaining fractured ribs. The employee was hospitalized.

An employee was inspecting a pipe in the rice cooking area near an oven. While checking for a clog, the fingers of their right hand were caught in an airlock at the base of the pipe. All the fingers were amputated except the thumb. The employee was hospitalized.

An employee was removing dough from the discharge at the bottom of a mixer when the scraper contacted his left index finger and amputated it.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.