105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Universal Plant Services

Direct exposure to electricity, greater than 220 volts · Third or fourth degree electrical burns

Federal OSHA recorded a severe workplace injury at Universal Plant Services, 1700 S. Union Ave, TULSA, OKLAHOMA 74107 on — Third or fourth degree electrical burns, affecting the multiple body parts, n.e.c..

An employee was cleaning inside a 13.8kV cabinet when an arc flash occurred. The employee sustained third-degree burns to the left hand and thigh. The employee also fell backward from a step stool and sustained a laceration to the back of their head.

Hospitalized Multiple body parts, n.e.c. Switchboards, switches, fuses

Universal Plant Services

On April 3, 2020, an employee was placing caution tape around a crane lifting area when the crane extended the outriggers, one of which landed on the employee's right foot. As a result, he sustained three toe amputations.

Universal Plant Services

An employee was operating a portable grinder with a cup tool attachment to bevel the edge of a piece of pipe. The cup tool disintegrated and debris from the cup tool struck the left side of the employee's face. The employee was transported to hospital.

View Universal Plant Services's full OSHA safety record →

Star Pipe USA LLC

An employee was making modifications to an electrical panel when an arc flash occurred. The employee suffered burns to multiple parts of the body.

Star Electric Company of Texas

An employee was installing a ground wire to a power transmission pole. The ground wire contacted an energized portion of a cut-out, causing an arc-flash. The employee was hospitalized with second degree burns to their chest and arms.

Powertown Line Construction LLC

An employee was connecting a utility transformer for underground service to a home. The employee's impact drill went across two connection bars with 240 volts of potential, creating an arc flash. The employee sustained burns to the face and eyes due to the arc flash and molten aluminum.

Stanley Black and Decker, Inc

On December 15, 2023, at 9:15 AM, an employee was changing 60-amp fuses in a 480-volt panel when an arc flash occurred. The employee was hospitalized with burns to both hands.

Sun Valley Contractors, LLC

An employee had just turned off breakers and was loosening wires on panels when they were shocked by 480 volts of electricity.

UPS Industrial Services, LLC

An employee was positioning dunnage on a trailer while pipe was unloaded from a forklift. A pipe fell and the employee's right thumb and index finger were caught between the pipe and a piece of dunnage. The thumb was crushed, and the index fingertip was amputated.

Phoenix Tube Company, Inc.

An employee was using a lifting sling on a crane to move a straight-bar bundle and place it on top of an existing bundle. When moving the lifting sling, it became pinched between the bundle and a wood cleat. The bundle then fell onto the employee's left foot, resulting in crush injuries.

Kopco, Inc

An employee was stacking metal tubes using a forklift. A stack became unstable and the employee got out of the forklift to steady it, instructing his helper to get into the forklift. The forklift movement caused some tubes to fall and strike the employee, resulting in an open fracture of his left hand.

Wilson Machine & Welding, Inc.

An employee was setting up a flexible gear coupling hub in a lathe, preparing to bore it out to fit a shaft. The hub assembly was not secured in the chuck when the crane support was removed, and the employee's right little finger was caught between the hub assembly and the inside of the lathe. The fingertip was amputated.

D & J MACHINERY, INC.

An employee was using a crowbar to loosen a flat bar when the crowbar struck the employee's right eye. The employee was hospitalized and required surgery.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.