PEVELY, MISSOURI—
MetalTek International, Inc.
Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury at MetalTek International, Inc., 8600 Commercial Blvd, PEVELY, MISSOURI 63070 on — Heat (thermal) burns, unspecified, affecting the multiple foot (feet) locations.
Final narrative
An employee dropped a hot ARC rod onto the sand floor. The rod contacted his boot, burned through the leather, and contacted his left foot. He suffered burns to his foot and toes, which required surgery.
More severe injuries at MetalTek International, Inc.
WAUKESHA, WISCONSIN—
MetalTek International, Inc.
An employee was turning off a gas valve when he bumped into a die brush and struck the spinning die. The die pin struck him on the back, resulting in contusions, abrasions, and a severe laceration to his back that required hospitalization and surgery.
PEVELY, MISSOURI—
MetalTek International, Inc.
On October 9, 2024, an employee was repositioning the end of a metal casting that was not attached to the hoist. The employee's left ring finger was crushed between the part and the work table, resulting in the amputation of their left ring fingertip.
WAUKESHA, WISCONSIN—
MetalTek International, Inc.
An employee contacted a furnace and sustained an electrical shock.
WAUKESHA, WISCONSIN—
MetalTek International, Inc.
An employee was changing out an empty tote of wash for a full tote in a foundry. The mixer/frame fell and struck the employee's left arm, causing a compound fracture.
WAUKESHA, WISCONSIN—
MetalTek International, Inc.
An employee's fingertip was amputated by a manual office paper cutter.
View MetalTek International, Inc.'s full OSHA safety record →
Similar incidents · Same event type
BAY CITY, TEXAS—
OQ Chemicals
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
HAUPPAUGE, NEW YORK—
Husbe Zoaq
An employee was straining hot water from a pot of rice when the water splashed onto them, resulting in burns to their chest, arms, shoulder, and back.
FORT WORTH, TEXAS—
The Cumberland Rest Inc. dba Trinity Terrace
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
SAN ANTONIO, TEXAS—
Mueller & Wilson Inc
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
MADILL, OKLAHOMA—
Oklahoma Steel & Wire Co., LLC
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 331513)
BATH, PENNSYLVANIA—
Effort Foundry, Inc.
An employee was unloading metal from two drums on a pallet. The employee removed the lid from the second drum and the drum fell over onto his ankle. The employee sustained a fractured ankle.
BATH, PENNSYLVANIA—
Effort Foundry, Inc.
An employee was working with team members on the pouring line, casting a sand mold. Molten metal entered the employee's personal protection suit and severely burned his left leg, calf, and ankle.
PEWAUKEE, WISCONSIN—
Northern Stainless Corporation
An employee was jointing a board with a jointer. The board jumped when it came into contact with the jointer's cutter head, and the jolt caused the employee's left hand to slide between the board and the guard and come into contact with the cutter head. He suffered lacerations/partial amputations to the middle, ring, and index fingers.
WAUKESHA, WISCONSIN—
MetalTek International, Inc.
An employee was turning off a gas valve when he bumped into a die brush and struck the spinning die. The die pin struck him on the back, resulting in contusions, abrasions, and a severe laceration to his back that required hospitalization and surgery.
PILOT POINT, TEXAS—
Staley Steel LLC
At 11:45 a.m. on June 13, 2025, an employee of Staley Steel, LLC, was performing preventive maintenance on an overhead crane. While he was holding a grease gun hose and nozzle, he contacted electrical components inside an electrical box. He suffered a first-degree electrical burn on the palm of the left hand, as well as pain up his left arm to the shoulder, and was hospitalized.
More severe injuries in MISSOURI
SAINT LOUIS, MISSOURI—
WADDELL CONCRETE INC.
An employee was readjusting a safety hook to remove hardware from gang forms when his feet slipped. He fell to the ground, resulting in a broken left arm and wrist.
MOUNT VERNON, MISSOURI—
Dollar Tree
An employee was on a step ladder in a store aisle, making room on shelving for merchandise. She fell from the step ladder to the floor, suffering two fractures in her left leg. She was hospitalized, requiring surgery.
CHESTERFIELD, MISSOURI—
Corrigan Brothers Inc
An employee was closing the side cargo door to a company van. The tip of his finger got caught between the door and the door jamb, resulting in a partial amputation.
MOBERLY, MISSOURI—
Plumb Supply Company
An employee lost his footing while climbing an inclined ladder. He stumbled down one step and was able to stabilize himself by holding the railing and twisting his body, but he suffered an internal abdominal injury and was hospitalized.
SPRINGFIELD, MISSOURI—
JRI INDUSTRIES
An employee was manipulating dies on a brake press. The press caught and crushed the employee's right forearm, resulting in hospitalization.