Gardner Asphalt Supply, LLC

A crew was installing drilled micropiles alongside an outdoor covered deck foundation. The injured employee was working the front of the drill when a loose section of casing dropped onto the tip of a rig wrench and pulled the wrench down to an embedded casing. The employee's left little finger was caught between the rig wrench and the embedded casing and was amputated above the top knuckle.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

An employee had been cleaning the work area. While lifting a saw, the employee's index finger was lacerated by the saw blade. A tendon was cut and required surgery.

An employee was installing a hydraulic extension cylinder in a tow truck when their leg was caught between the cylinder and the truck frame. The employee was hospitalized with a broken tibia, which required surgery.

An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.

An employee was coming from the parking lot at the start of his shift. He fell while walking in the crosswalk and sustained pain and numbness in his right leg. The employee was hospitalized and required surgery.

Employees had just finished re-lacing a line through a machine. As they were preparing to make a splice, one employee's left index finger was crushed between two pull rollers. The finger was amputated.

An employee was replacing a pop-up roller between the drop plate table and the far stacker conveyor after clearing a jam. The pop-up roller became hung up on the frame of the roller flight conveyor. The employee s hand then became caught between the pop-up roller and the belts on the drop table. The employee sustained an avulsion to their right hand excluding the fingers. The employee was hospitalized and required surgery.

On May 6, 2025, a temporary employee was loading a sheet of fiberglass between two rollers on a roofing material machine. The top roller was not rotating. The roller fell and pinched his left ring fingertip, causing a partial amputation of the finger that required surgery.

An employee was about to dump sand from a hopper, raised on the forks of a forklift. As the hopper's weight shifted forward and it began to dump, the employee's left middle finger was pinched between the forklift fork and the metal frame of the hopper. The fingertip was crushed, and the employee underwent a medical amputation at the first knuckle.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.