Rana Meal Solutions, LLC

An employee was searching for pieces of a broken ball check valve around the rotating filler valve when the valve closed on their fingertip. Their left index finger was amputated. The machine was guarded at the time.

An employee was removing a flexible hose from a production pipeline. The hose end detached from the pipeline end and sprayed the employee with hot water. The employee suffered burns to the left and right wrists and the front of the leg.

An employee was on a work platform about 5 inches above floor level, packing finished product at the end of a production line. When she stepped back off the work platform, she fell backward and suffered a head contusion.

On March 21, 2020, an employee was cleaning the rollers on a pasta machine when his smock was caught and his arm was pulled into the machine. The rotating blade inside the machine amputated the employee's arm below the elbow.

On January 16, 2019, at approximately 3:35 p.m., a machine operator was working to run normal production on the ravioli forming machine. The employee was tasked with continuously supplying (feeding) the filling into the machine and to start/stop the machine to make small production adjustments to the product. At some point during production, the injured employee contacted moving components inside the machine and sustained an amputation, without bone loss, to the middle fingertip of the left hand.

An employee tripped over a stool and fell on the floor, resulting in a left displaced mid-cervical femoral neck fracture.

An employee was installing fence posts when they stepped into a recently dug hole that was not visible due to rainfall. The employee's leg was fractured.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.

An employee tripped over a concrete curb stop in a parking lot. The employee fell to the ground, landing on their left hip and breaking it.

An employee tripped over a bin and fell to the floor. She landed on her hip and braced herself with her arm, resulting in a fractured hip and wrist.

An employee was reaching for a piece of angle iron when it fell onto his hand, which was on a table to support him as he reached for the overhead rack. He suffered a broken finger and was hospitalized, requiring surgery.

An employee was putting dough into a forming machine when their left little fingertip was amputated by the forming die.

An employee slipped and fell outside, landing on her hip on concrete. The hip was broken and she was hospitalized, requiring surgery.

An employee was working to open the liftgate on the back of a delivery truck. His left middle finger was pinched between the gate and its frame, resulting in a fingertip amputation.

An employee fell while moving a water canister, resulting in fractures to four fingers on her right hand.

An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.

An employee was mixing sauce using a sauce barrel mixer when his left little finger was amputated.

An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.