Pedestrian struck by vehicle or object propelled by another vehicle in nonroadway area · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Capstone Logistics, LLC, 222 Otrobando Avenue, NORWICH, CONNECTICUT 06360
on — Fractures , affecting the Foot (feet), toe(s) unspecified.
Final narrative
An employee was walking across a dock area in a warehouse when a forklift hit a pallet that subsequently struck the employee. His foot became pinned between the pallet and a post, resulting in a foot fracture that required hospitalization.
An employee was loading a trailer of automotive parts when the load caught the top of the trailer. He jumped up to clear a wedged item. When the item came down, the load collapsed onto the employee, resulting in a fractured pelvis.
An employee was performing maintenance on an a conveyor system. He was working to loosen the chain that moves the belt when his right index fingertip was caught by the chain and amputated.
An employee was walking on the dock when a forklift ran over their right foot. Their foot was crushed. The employee was taken hospitalized and required surgery.
An employee was collecting pallets in the freezer when his foot slipped on condensation on the platform of the pallet jack and struck a post, resulting in a foot fracture.
The injured employee was walking through the warehouse. Another associate was driving a forklift with a pallet of large format tile (slabs) when the slabs began to tip. The injured employee ran over to stop the slabs from falling, but the slabs fell on his lower left leg/foot. The employee sustained fractures in his lower leg and foot. He was hospitalized and required surgery.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was helping offload an aircraft. She was standing in the opening between a parked cart and an unoccupied aircraft tug when another vehicle struck a stationary bag cart, which then struck her. The employee suffered a skull fracture near the right eye, a right kneecap fracture, a nose fracture, and sinus damage, as well as soft tissue damage to the left calf and hip. She was hospitalized and required surgery.
An employee was cutting steel channels from a hanging rack that was being supported by a forklift. When they were finished, the forklift started moving the rack out of the area and a piece of material snagged one of the rack legs, causing the rack to tilt backward. The rack slipped off the forklift and struck the employee on his right side/lower back. He sustained a fractured pelvis and was hospitalized.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
More severe injuries in this industry (NAICS 424410)
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was picking items from the freezer section of the warehouse. When he stepped down onto the floor, he turned on the planted foot, and felt a "pop" and pain in his knee. The employee was hospitalized with a dislocated knee and two torn tendons. He required surgery to repair the tendons.
At 7:40 a.m. on October 3, 2025, an employee was unloading a bulkhead at a dock door. As he pulled the bulkhead out of a trailer, its plastic lip caught on the dock plate, causing the employee to fall and twist his left leg, knee, and hip. The hip was broken and he was hospitalized, requiring surgery.
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.