Caught, entangled in running powered equipment normal operation · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at The Goodyear Tire & Rubber Company, 2000 NW US HIGHWAY 24, TOPEKA, KANSAS 66601
on — Fractures , affecting the Other finger(s) n.e.c..
Final narrative
An employee was making beads on a machine when the center bead wire did not seat properly in the machine. The bead wire struck the employee's left hand, resulting in an open displaced fracture of the middle phalanx of the ring finger that required surgery.
Hospitalized Other finger(s) n.e.c. Other special process machinery n.e.c.
More severe injuries at The Goodyear Tire & Rubber Company
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
At 2:45 p.m., an employee was outside the plant during a break before his next shift. He was speaking with an associate when he suddenly fell from the third-level steps to the ground, striking his head on the concrete. The employee was hospitalized due to internal brain bleeding, a wound to the back of his head requiring staples, and heat-related dehydration.
An employee was adjusting a misaligned ring on a tire balancing machine when the ring fell and caught their left thumb against the machine's housing. The employee sustained a fracture and partial amputation of the distal phalanx of the thumb.
An employee was moving an automated storage and retrieval system (ASRS) vehicle that was stuck. When part of it became free, the employee's left little finger was caught between the vehicle and a storage shelf. The employee sustained an amputation to the fingertip.
An employee was working with a nonpowered spool truck. The employee lifted the spool retaining arm and kneeled to adjust the liner. As she was standing up, the retaining arm fell and caught her right middle fingertip against the body of the roller. The fingertip was amputated.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 423130)
An employee was rolling a rear tire for a tractor to a customer's building. The tire started to tip and the employee went to stop it by stepping into the middle of the tire. The edge of the tire struck his head and knocked him to the ground and the tire landed on his head. The employee was hospitalized with a fractured and dislocated left hip that required surgery and a scalp laceration.
An employee was pulling a metal skid off a stack to place the skid on the floor. The weight of the skid shifted and the edge caught the employee's right middle finger, resulting in a partial amputation.
An employee was operating an order picker in a warehouse. While backing down an aisle, the employee struck a 60-inch-by-60-inch pallet being lifted by another order picker. The employee suffered a tear to the cartilage surrounding their hip.
At about 1:25 p.m. on August 7, 2024, a temporary employee was operating a foam ring cutter when its pin broke, causing the head to fall and hit his left hand. He suffered a partial amputation to the ring finger, as well as a laceration and nail damage to the middle finger.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.