Fall to lower level from collapsing structure or equipment less than 6 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Alsip Minimill, LLC, 13101 South Pulaski, ALSIP, ILLINOIS 60803
on — Fractures , affecting the Wrist(s).
Final narrative
An employee was on a straight ladder when the ladder slipped, causing the employee to fall approximately 4 feet to the floor and sustain a left wrist fracture.
An employee was descending a 10-foot A-frame ladder. The ladder came out from under the employee when he was about 5 to 6 feet above ground level. He fell, landed on the left side of his body, and sustained fractures to four ribs, his pelvis, and hip socket, and sustained injuries on the left side of his body. The employee was hospitalized.
An employee was handling a small platform ladder with three steps and two wheels in the front. The employee was found on the floor underneath the ladder. She was hospitalized with multiple fractures to the sacrum.
An employee was on a ladder four feet above the ground to install insulation. The ladder began to slide and the employee jumped to the shop floor, breaking his left tibia and fibula at the ankle. He was hospitalized, requiring surgery.
On July 21, 2025, an employee was working from a 10-foot step ladder while installing a 3-by-5-foot glass window pane on the outside of a new home under construction. The window fell from the frame and the employee went to catch it when the ladder slipped. The employee fell 5 feet to the ground and landed on small pieces of concrete left over from the foundation pour. The employee was hospitalized with a dislocated elbow and fractured wrist that required surgery.
More severe injuries in this industry (NAICS 322121)
Tools and parts were being lowered to the ground from an elevated platform in a 5-gallon bucket. The rope being used to lower the bucket failed; the tools and parts fell and lacerated the left forearm and upper left leg of an employee on the ground.
An employee was tracking an infeed belt on a scrap hogger when their right arm was caught between the belt and a roller. The arm was broken and the employee's shoulder was dislocated. The employee was hospitalized.
An employee was working to clear a jam from a paper napkin folder. The ram that advanced the napkins pushed the employee's right arm into the side of the machine, causing several lacerations and a hairline fracture.
An employee was troubleshooting overflowing ink on a printer-slotter machine when their right ring fingertip was caught in a guarded roller, resulting in a partial amputation.
An employee was disconnecting wires in preparation to swap out a refiner motor when they contacted energized equipment and sustained an electrical shock. The employee was hospitalized.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.