Contact with hot objects or substances · Thermal burns degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Atlas Roofing Corporation, 2322 Valley Road, MERIDIAN, MISSISSIPPI 39307
on — Thermal burns degree unspecified, affecting the Head and extremities.
Final narrative
An employee was transferring hot roofing tar (350 degrees Fahrenheit) from the truck to the tank when the hose connection to the truck came off, spraying them with hot tar. This resulted in burns to both hands and arms from the elbows down and on the right side of their head, including their ear.
Hospitalized Head and extremities Asphalt, tar unmolded
An employee was troubleshooting a conveyor belt sensor when the belt advanced and caught the employee's hand. They sustained two finger fractures and a hand laceration.
An employee was replacing a chain on the palletizer machine when his hand was caught between the chain and sprocket. His left middle fingertip was crushed and surgically amputated. The machine was not locked out at the time.
An employee was lacing up on a roofing shingle maker. The machine caught the employee's hand, peeling off the skin from his left index finger to his left little finger.
An employee was checking the granule flow from a silo to a conveyor when the silo pneumatic door closed on his right ring finger, resulting in an amputation.
An employee pulled out a bucket of hot oil from under the fryer. The employee then stood on the table to clean the back wall. He stepped down into the bucket of hot oil, resulting in third-degree burns to his left leg.
An employee was performing maintenance under a kettle. When he removed a tri-clamp on a transfer line, the hot fat and broth material in the kettle poured out onto his arm. The employee was hospitalized with burns.
After completing a run with an oil distributor truck, an employee was working to return (suction) the hot oil to the tank of the truck. When the employee opened one of the valves, hot oil (approximately 385 degrees) sprayed their face, resulting in first-, second-, and third-degree burns.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was using a water hose to clean debris out of the outfeed of a log conditioning vat. Water began entering the vat from the adjoining vat through a void in the separation wall at the infeed of the vats. As the employee was exiting the vat he had been working in using the access opening at the outfeed, hot water exiting the access opening entered the top of his protective hip wader. It pooled at the bottom of the wader and burned his left foot and ankle.
More severe injuries in this industry (NAICS 324122)
An employee was coming from the parking lot at the start of his shift. He fell while walking in the crosswalk and sustained pain and numbness in his right leg. The employee was hospitalized and required surgery.
Employees had just finished re-lacing a line through a machine. As they were preparing to make a splice, one employee's left index finger was crushed between two pull rollers. The finger was amputated.
An employee was replacing a pop-up roller between the drop plate table and the far stacker conveyor after clearing a jam. The pop-up roller became hung up on the frame of the roller flight conveyor. The employee s hand then became caught between the pop-up roller and the belts on the drop table. The employee sustained an avulsion to their right hand excluding the fingers. The employee was hospitalized and required surgery.
On May 6, 2025, a temporary employee was loading a sheet of fiberglass between two rollers on a roofing material machine. The top roller was not rotating. The roller fell and pinched his left ring fingertip, causing a partial amputation of the finger that required surgery.
An employee was about to dump sand from a hopper, raised on the forks of a forklift. As the hopper's weight shifted forward and it began to dump, the employee's left middle finger was pinched between the forklift fork and the metal frame of the hopper. The fingertip was crushed, and the employee underwent a medical amputation at the first knuckle.
An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.
The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.
An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.