Pedestrian struck by vehicle backing up in nonroadway area · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at North American Lighting, Inc., 2275 S Main St, PARIS, ILLINOIS 61944
on — Fractures , affecting the Toes(s), toenail(s).
Final narrative
On July 18, 2024, at 1:09 a.m. in the receiving dock area an employee was pushing a trash can toward the compactor as a forklift was operating in reverse. The forklift struck the employee's left foot causing three toe fractures, including an open fracture of the big toe. The injured employee was hospitalized.
Hospitalized Toes(s), toenail(s) Forklift, order picker, platform truck powered
More severe injuries at North American Lighting, Inc.
An employee was retrieving empty plastic totes from a material storage area. The totes weighed 7.5 pounds and measured 15 inches in width, 24 inches in length, and 7 inches in height. The employee tripped over conveyor rails and fell on his left side onto the concrete floor, resulting in hospitalization with a ruptured quadricep tendon in his right knee.
On July 22, 2024, at approximately 11:15 AM, an employee was moving an air conditioning unit on the roof when their right middle finger became caught between the bottom of the unit's frame and the roof curb frame. The employee sustained an amputation to the fingertip.
At about 3:00 a.m. on November 14, 2020, an employee was checking a molding machine containing seized-up material. As he opened the machine's door and looked down, the molding material gassed off and blew into his face. He suffered facial burns, as well as splatters on the neck and hands, and was hospitalized,
An employee walked to the back of the assembly line to sign off on the completion of the fail-safe process. When they were returning to the front side of the assembly line, the employee stepped inside the frame of a finished goods cart and tripped, striking their head and right shoulder against the cart and the floor. The employee was hospitalized with a head laceration and a dislocated right shoulder.
On June 24, 2019, an employee was hooking up carts to his tugger when he tried to turn around and lost his balance, falling to the floor. He suffered a non-displaced fracture to his right hip, requiring hospitalization.
An employee was diagnosing the cause of a rear light malfunction on a forklift when the reverse gear engaged. The forklift moved backward and contacted the employee causing a metatarsal fracture in their left foot and injury to their lower right leg.
An employee was collecting shopping carts in the parking lot when he was struck by a customer's truck as it was backing out of a parking spot. The truck pinned the employee's left leg against the cart mule they were using. The employee was hospitalized with a fractured leg and required surgery.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee took a picture of the seal and license plate on a delivery truck after loading. The truck then reversed back to the dock and pinned the injured employee against the dock. The employee sustained an abdominal fracture.
An employee was between a milling machine and an 18-wheeler belly dump when the 18-wheeler backed up and ran over his feet and legs. The employee was caught between the front of the milling machine and the truck. The employee sustained fractures to their hip, leg, and feet.
More severe injuries in this industry (NAICS 336320)
An employee was retrieving empty plastic totes from a material storage area. The totes weighed 7.5 pounds and measured 15 inches in width, 24 inches in length, and 7 inches in height. The employee tripped over conveyor rails and fell on his left side onto the concrete floor, resulting in hospitalization with a ruptured quadricep tendon in his right knee.
At 11:50 a.m. on June 17, 2025, an employee was working on a 60-amp battery. As he was removing nuts with a wrench, there was an arc flash. The wrench welded itself to the terminals, and the employee suffered second-degree burns along the left palm, thumb, and index finger, as well as a burn on his right middle finger.
An employee was loading an automobile door from a cart. A second door was dropped and landed on his left heel, lacerating his foot and ankle. The employee was hospitalized.
An employee was clearing a jam on a line when his glove and hand became caught between a roller and conveyor. The employee sustained multiple lacerations.
An employee was walking back to his forklift after stopping to remove paper from its forks. Another forklift struck him as it backed out of a semi-truck trailer. He was pinched between the side of his own forklift and the counterweights on the forklift that was backing up; he suffered a contusion from the top of his left thigh to his ankle.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.