GO-TILT CONSTRUCTION, LLC

An employee was coming down from a shoring scaffold that he was erecting when he lost his footing and fell 10.5 feet to the ground. He was hospitalized with a fractured back.

On or about January 28, 2016 at 8:15 am, an employee performing stripping operations fell approximately 10 feet. The employee sustained a fracture to a thoracic vertebra.

An employee was standing on a six foot folding step ladder assembling wooden forms. The plywood that the ladder was on shifted and the employee fell 18 feet off the side of the building resulting in a back injury.

On 5/26/2015, an employee was on a ladder about 4 to 5 feet from the ground and close to the trash chute. When he was reaching over to secure plywood, he lost balance and fell injuring his left leg and wrist.

An employee was running during a fitness test and experienced heat illness, chest pains, and felt faint. The employee sustained heat exhaustion.

At about 10:30 a.m. on August 7, 2025, a warehouse technician working for Tnemec Company, Inc., began sweating profusely a half-hour into their shift. The employee was using a forklift to move staged pallets of paint to a shrink-wrapper, shrink-wrap the pallets, and then load the pallets onto a truck using a forklift. The employee became ill about two hours later and was hospitalized for heat-related illness.

An employee was performing job duties and became overheated. The employee was hospitalized for heat-related illness.

On July 29, 2025, an employee working near a metal furnace. Toward the end of his shift, he was charging a furnace and began to experienced heat exhaustion. He had also been in areas of elevated temperatures due to heat sources such as direct sunlight and a combustion engine. The employee was hospitalized with dehydration.

An employee was working near molten metal and experienced heat illness symptoms including cramps. The employee was hospitalized.

An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was installing insulation in a wall when she tripped on a hole (12" deep) and fell, hitting her head on the concrete floor. The employee sustained fractures to her leg and wrist, and lacerations to her head. The employee was hospitalized.

An employee was loading a 4-inch wooden door into a pickup truck when he felt a pop in his right side behind his shoulder blade. He was hospitalized later that day and underwent surgery, having suffered a collapsed right lung.

An employee was operating a power drill when it slipped. The drill bit punctured the employee's hand and they were hospitalized.

An employee was helping a coworker transport a tall palm tree with a mini skid steer. The employee was severely shocked by a high-voltage electrical wire above the ground.

An employee was retrieving a Christmas tree from a shelf using a ladder. He missed a step and fell to the concrete floor. He sustained injury to his head and wrist.

An employee was inspecting a generator whose radiator was leaking. He slipped, and a fan blade in the generator amputated his thumb and index finger.

An employee was operating an agricultural tractor during sugarcane harvesting. The employee sustained a lumbar sprain due to vibration or motion from the tractor.

An employee was moving a 3-ton condensing unit, strapped down on a dolly, out of a garage. The strap broke, causing the employee to fall backward onto the brick pavered driveway. The employee suffered injury to a spinal ligament in the neck.