Struck by suspended or swinging objects n.e.c. · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at Cactus Drilling Company, LLC, Cactus Drilling Rig 167. WW 30-31HC #2ALT 265-323 CR-181C, DOYLINE, LOUISIANA 71023
on — Fractures , affecting the Lower leg(s).
Final narrative
An employee was pulling back a stand of heavy-weight drill pipe so it could be racked in the derrick. While the driller was slacking off with the top-drive, the injured employee unlatched the drill pipe elevators and pulled the pipe toward himself. The pipe came at him faster than expected and as he tried to get out of the way, the pipe hit his left ankle/leg and fractured the left tibia.
Hospitalized Lower leg(s) Pipes, tubes metal
More severe injuries at Cactus Drilling Company, LLC
An employee was watching the landing joint being lowered into the rotary table when it clipped the slip bowl, causing the slip bowl to flip over and strike the employee's legs. The employee's right femur was fractured and they sustained a fracture to the left leg below the knee. The employee was hospitalized.
A 5.5-inch production casing was being rolled. An employee was loading it onto a hydraulic catwalk when their left little fingertip was crushed between casing and the casing roller ramp. The fingertip was amputated behind the nailbed.
An employee was inspecting the liners of a mud pump that was making noise. The machine was shut down. As the pump was idling down, the inspection plate blew and knocked the employee back. Hot gear oil from the pump blew onto him, causing second-degree burns to his left arm and the left side of his face and ear. The employee was hospitalized.
An employee pulled a stand of drill pipe back and had just finished pushing it back into a "finger" before securing it with rope. The driller was coming down with top drives and blocks. A gust of wind blew the employee's secondary retention into the Kelly hose clamp. As a result, the top drive pulled the cable and the employee down into the steel frame of the derrick board. The employee's left hip and right femur were fractured.
An employee was slacking off with the top drive and blocks so the elevators could be latched to a drill collar on the hydraulic catwalk. The employee went to grab the horns of the elevators to help maneuver them around the pipe. His left middle fingertip was crushed between the elevators and lift sub on the drill collar resulting in an amputation.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was using a crane to move a 44-foot, 3,343-pound I-beam. As the beam was moving west, it straightened out (north to south), beginning to swing south toward the northwest corner of a building. The crane then sent the beam southward, directly toward the corner of the building. The beam caught the tips of the employee's left index, middle, and ring fingers against the building. The last joints of the middle and ring fingers were amputated, and the last joint of the index finger was partially crushed.
An employee was placing a board on top of a bundle of steel tubing. A crane was moving a bundle of steel that struck the employee and caught them against another bundle of steel tubing. The employee sustained a crushing injury and hematoma to the right upper leg.
Employees were using a crane to lower large tree stems and branches while removing limbs and branches from the load. This caused the load to shift and strike an employee in the back, resulting in a hematoma on the lower left part of their back and a fractured ankle.
More severe injuries in this industry (NAICS 213111)
An employee was stepping down off a 6-inch containment platform to finish loading his truck, when his right ankle rolled. The employee sustained a fractured tibia and fibula at the right ankle and required surgery.
A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.
An employee arrived on location and loaded a blow-out-preventer (BOP) on a 1-ton flatbed truck. While standing on the flatbed securing the the BOP, the employee stepped into a void/hole on the flatbed surface. This caused him to lose balance and fall off the truck bed with his leg still caught in the hole. As a result, he sustained fractures to his left leg.
An employee was rigging up a location. He was using an Allen wrench to free up rotation and start the drawworks engine manually. The engine rotated and his left little finger became caught between the Allen wrench and the engine. The employee sustained an amputation to his little finger and fractures to his wrist.
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
A security employee was responding to an urgent call from staff regarding a violent patient. The employee tripped and fell on the floor outside of the stairwell. The employee sustained a closed head injury, contusion of the cerebrum without loss of consciousness, and a closed fracture of the distal end of the right radius.
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
An employee was walking on a sidewalk and stubbed his toe on an elevated portion of concrete, causing him to trip and fall. The employee's right knee was dislocated.