105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Helmerich & Payne International Drilling Company

Struck by discharged object or substance · Traumatic injuries or exposures unspecified

Federal OSHA recorded a severe workplace injury at Helmerich & Payne International Drilling Company, Hwy 270 & Hwy 3 in Watonga OK. Go E on Hwy 3 4miles N2610 Rd. Turn N on N2610 Rd. 2.5miles E, WATONGA, OKLAHOMA 73772 on — Traumatic injuries or exposures unspecified, affecting the Other finger(s) n.e.c..

An employee was on mud pumps cleaning out the bay with a pressure washer when the tip of the washer wand came off. Diesel fluid was injected into his finger as he was replacing the wand tip.

Hospitalized Other finger(s) n.e.c. Petroleum-based fuels

Helmerich & Payne International Drilling Company

An employee was changing out the elements in the double-rotating head. The peg that was welded to the rig floor, where the double-rotating head was being stored, broke at the weld causing the metal rotating head to fall and strike the employee's left leg and fracture it.

Helmerich & Payne International Drilling Company

An employee had been lowered down to a catwalk with a hoist. He was unhooking the hoist from the rotating head when it fell over. His left leg was pinned between the rotating head and a pipe retention post, resulting in swelling and inability to bear weight on his leg.

Helmerich & Payne International Drilling Company

A derrickman was trying to latch a stand of drill pipe at the derrick board. The stand pulled him off the board, pinning his left forearm against the safety gate and breaking it.

Helmerich & Payne International Drilling Company

An employee was opening the forks of a forklift to pick up a bag of casing protectors when his left ring fingertip was partially amputated between the fork and the forklift carriage. Impact gloves were worn at the time of the incident.

Helmerich & Payne International Drilling Company

An employee was driving back to the rig from the water well and ran over a rattlesnake. He got out of his vehicle and walked to the rattlesnake, which bit his right middle finger. He was hospitalized.

View Helmerich & Payne International Drilling Company's full OSHA safety record →

TSA Processing - Montgomery

A temporary employee was carrying a nail gun through the warehouse when it hit his leg, activated, and fired a nail into the leg.

First Environmental, Inc.

An employee was working to assess the operation of a high-pressure water nozzle. The water system was activated and the employee was cut by high pressure water on his left hand where the palm meets the wrist. The employee was hospitalized.

American Industrial Services

An employee's left bicep was lacerated by high-pressure water during water blasting operations. The employee was hospitalized.

Johnson Industrial Coatings, LLC.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.

Tanksco, Inc.

An employee was sandblasting paint from a water tower when the blasting media sprayed across their forearm, resulting in an elbow injury that required hospitalization.

Hall Drilling, LLC

An employee was stepping down off a 6-inch containment platform to finish loading his truck, when his right ankle rolled. The employee sustained a fractured tibia and fibula at the right ankle and required surgery.

C. Miller Drilling Inc

A service crew was pulling a pump and motor from a well. After breaking a joint of pipe loose from another joint, an employee grabbed the chain tongs to prevent the pipe from spinning in the well, so the crew could continue taking it apart. The bolt that attaches the chain to the handle of the chain tongs broke, causing the chain to swing around and strike the employee's lower right leg. The chain severely punctured his leg and fractured his tibia.

Amercian Well Service Llp

An employee was working to remove a stuck fish tool from a drill shoe. Their thumb was struck by a hammer, resulting in amputation.

Axis Energy Services

An employee arrived on location and loaded a blow-out-preventer (BOP) on a 1-ton flatbed truck. While standing on the flatbed securing the the BOP, the employee stepped into a void/hole on the flatbed surface. This caused him to lose balance and fall off the truck bed with his leg still caught in the hole. As a result, he sustained fractures to his left leg.

ROBINSON DRILLING OF TEXAS, LTD

An employee was rigging up a location. He was using an Allen wrench to free up rotation and start the drawworks engine manually. The engine rotated and his left little finger became caught between the Allen wrench and the engine. The employee sustained an amputation to his little finger and fractures to his wrist.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.