WALLINGFORD, CONNECTICUT—
Thyssenkrupp
Struck by falling object unspecified · Fractures and surface, flesh wounds
At a glance
Federal OSHA recorded a severe workplace injury at Thyssenkrupp, 5 Sterling Drive, WALLINGFORD, CONNECTICUT 06492 on — Fractures and surface, flesh wounds , affecting the Ankle(s).
Final narrative
An employee was straightening a stack of copper plates when the plates fell over and struck his ankle. The employee sustained a fractured ankle and a laceration.
More severe injuries at Thyssenkrupp
BOLINGBROOK, ILLINOIS—
Thyssenkrupp
An employee was finishing a coil slitting operation when the coil rotated and caught his left hand between the coil and the divider, amputating his left pinky fingertip.
View Thyssenkrupp's full OSHA safety record →
Similar incidents · Same event type
LEOLA, SOUTH DAKOTA—
Agtegra Cooperative
An employee was walking past a crossover conveyor when a ramp came down and hit them in the back. The employee sustained a broken back vertebra, as well as a concussion, and was hospitalized.
MIDLAND, TEXAS—
Betenbough Homes, LLC
An employee was unloading frameless mirrors from a trailer. When unstrapped, the mirrors fell over onto the employee, who suffered a skull fracture, a brain bleed and blood clot, a broken left ankle, and lacerations.
EASTABOGA, ALABAMA—
Construction Staffing Solutions, LLC
A temporary employee was rigging secondary steel when the steel joist fell to the ground and struck his lower left leg, resulting in fractures to the tibia and fibula.
LOUISVILLE, GEORGIA—
CSBS Manufacturing LLC
Two maintenance employees were dismantling a machine part (steel cylindrical rollers) on the ground. After unbolting a portion, part of the assembly fell approximately 6 inches onto one employee's left little finger. The employee was hospitalized and about 3/4" of their little finger above the top joint was surgically amputated.
TUSCALOOSA, ALABAMA—
Walmart Inc.
An employee was stacking a pallet when the pallet fell, injuring her left leg. She was hospitalized and had surgery on her left leg.
More severe injuries in this industry (NAICS 423510)
PITTSBURGH, PENNSYLVANIA—
Triad Metals International
A load of steel angles was being lowered when the lifting chain hit the load, causing it to slide toward an employee. An angle slid and pinched the employee, catching both of their legs between the beams and an angle. The employee suffered two fractured legs.
BEDFORD PARK, ILLINOIS—
Ryder System Inc.
An employee was on the deck of a trailer helping a customer unload tubes. The employee was working to place a cargo strap on the remaining tubes using a winch bar when it slipped off the tubing, causing him to lose his balance and fall headfirst onto the asphalt lot below. The employee suffered a contusion on his forehead, resulting in hospitalization.
SARASOTA, FLORIDA—
EASTERN METAL SUPPLY, INC.
An employee and a customer were unloading two rectangular tubes. The tubes were wrapped together. The plastic wrap was cut so that one tube could be picked up. As the employee was lifting the top tube, the other tube (still connected to the top tube) came down onto his hand and broke two of his fingers. He was hospitalized.
HOUSTON, TEXAS—
TEXAS PIPE AND SUPPLY COMPANY
An employee was assisting as a forklift got pipe from a pipe rack. The employee was on one of the forklift's forks as it was raised to the top of the rack, a height of about 15 feet. He fell to the ground and suffered a dislocated and fractured right elbow.
HAMILTON, OHIO—
United Performance Metals, LLC
On September 23, 2025, at approximately 7:43 p.m., an employee was using a knife to cut poly banding from a metal coil. The knife slipped, causing a laceration to the inside of their left arm at the elbow joint. The employee was hospitalized and required surgery to repair a damaged vein.
More severe injuries in CONNECTICUT
CHESHIRE, CONNECTICUT—
Heavy Weight Inc
An employee was checking on a machine outside of the building and removed a cover to clean out a blocked area. His hand was caught by a rotary valve in a dust collection machine. The employee's fingertip was amputated.
MERIDEN, CONNECTICUT—
Duro Bag
An employee was working to clean a glue roller with a scraper tool. The tool and the employee's left thumb were pinched between two rollers, resulting in a partial amputation.
HARTFORD, CONNECTICUT—
United Refrigeration Inc
An employee was re-arranging boxes of pipe insulation on a pallet. One of the boxes fell from the pallet and knocked over an upright empty cylinder. The cylinder fell and crushed the tip of the employee's right toe. The employee's toe required surgical amputation.
SOUTH WINDSOR, CONNECTICUT—
Michels Power, Inc.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
NORTH HAVEN, CONNECTICUT—
Parker-Hannifin Corporation
An employee was cutting extruded aluminum framing material using a horizontal band saw. She went to grab a rag in the machine when the rag contacted the blade and pulled her hand in toward the blade, resulting in a partial amputation of the right index finger.