Ignition of clothing · Thermal burns degree unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Cullman Casting Corporation, 251 County Road 490, CULLMAN, ALABAMA 35055
on — Thermal burns degree unspecified, affecting the Trunk and other upper extremities.
Final narrative
An employee was charging the furnace when a spark from the furnace ignited and struck the employee's undershirt. The employee sustained burns to their lower back, hands, and front abdomen.
Hospitalized Trunk and other upper extremities Clothing
More severe injuries at Cullman Casting Corporation
An employee was checking the level of iron in a furnace. The control panel joystick stuck in the forward position and the chip cart moved forward, catching the employee against the furnace and causing burns to his left hand, elbow, and stomach.
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
An employee was cleaning a seam with weather membrane cleaner. The cleaner soaked into the employee's gloves, and they caught fire when a cigarette was lit. The employee suffered first- and second-degree burns to both hands and was hospitalized.
The injured employee had been working with xylene in a paint booth and exited the paint booth for a smoke break. The employee dropped his lighter, causing his clothing to catch fire, possibly from xylene vapors. The employee sustained burns from their chest down to their thighs and was hospitalized.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
An employee was traveling down the maintenance aisle of a warehouse on a single-pallet front rider jack. The jack malfunctioned, causing the brakes to apply; the employee fell forward onto the concrete warehouse floor. The employee suffered an injury to the left leg and was hospitalized, requiring surgery.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was directing a truck driver to a dump site when the truck's peanut trailer slipped off the kingpin. As the trailer fell, a ladder attached to it lacerated the employee's ear. The employee was hospitalized.
An employee was unloading a forklift from a trailer to the ground. The employee was climbing down the ladder of the trailer when their foot slipped through one of the rungs, causing them to fall backward onto the forklift forks. The employee was hospitalized for fractured ribs.