CORDELE, GEORGIA—
GFMCO LLC
Other fall to lower level less than 6 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury at GFMCO LLC, 402 George Matthews Drive, CORDELE, GEORGIA 31015 on — Fractures , affecting the Multiple trunk locations.
Final narrative
An employee was changing a seal on a core machine. They were standing on the side of the machine while tightening a bolt when they fell approximately 5 feet, striking their back on a steel bar and suffering fractured ribs and a fractured back.
More severe injuries at GFMCO LLC
CORDELE, GEORGIA—
GFMCO LLC
An employee was applying lubricant to a mold machine. The employee slipped and his hand contacted the machine resulting in the amputation of the left middle fingertip.
CORDELE, GEORGIA—
GFMCO LLC
An employee was bitten by a spider while sitting at a computer. The employee developed an infection.
CORDELE, GEORGIA—
GFMCO, LLC
An employee was making a repair to a forklift. The tines of the forklift were elevated in order to access the brackets at the bottom of the backrest. While the employee was loosening one of the brackets, the backrest and tines fell off the forklift, striking the employee's back, legs, and feet. The employee was hospitalized with a fractured left leg that was broken in two places and a laceration to the right foot.
View GFMCO LLC's full OSHA safety record →
Similar incidents · Same event type
CHICOPEE, MASSACHUSETTS—
A&S Services Group
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
PINEVILLE, LOUISIANA—
Kisatchie Midnight Express
A driver was exiting his vehicle outside the plant gate when his foot slipped on the top step of the truck. He fell to the ground, landed on his left hip and elbow. The employee was hospitalized with a fractured hip/femur.
LIVERPOOL, NEW YORK—
Lockheed Martin Mission Systems and Training
Two employees were removing a service lift platform from the back of a radar system. While handling the service lift platform, employee 2 was standing on the back of the radar and lost their footing, causing the service lift platform to shift and fall. The injured employee then fell from the top of the platform electronic subsystem (PES) to the floor, approximately 56 inches. The injured employee fractured his left elbow and left hip.
JBSA LACKLAND, TEXAS—
Allen Tharp LLC.
An employee fell from a loading dock to the ground 2-3 feet below. She suffered a compound fracture of the left hip and was hospitalized, requiring surgery.
NEW BRUNSWICK, NEW JERSEY—
Allied Waste Systems Inc
An employee assisted in cleaning material from a conveyor pit. After the pit was cleaned, the employee proceeded to replace metal safety plates to ensure other employees did not fall into the pit. While replacing one of the last plates, the employee mis-stepped and fell approximately 5 feet into the pit. The employee was hospitalized with back/side bruising, elbow bruising, bone bruises, and/or fractured ribs.
More severe injuries in this industry (NAICS 331511)
BENTON, PENNSYLVANIA—
Benton Foundry, Inc.
An employee was realigning two halves of a core box on a core-making machine. Pneumatic pressure released, causing the core box to close on the employee's right thumb. The thumb tip was amputated between the nail and the knuckle.
BIRMINGHAM, ALABAMA—
American Cast Iron Pipe Company
An employee was performing maintenance/electrical work inside a substation, and used a ladder to access the top of a panel box. The employee fell 8-9 feet from the top of the panel box to the ground. The employee was hospitalized with fractures to their ribs and a shoulder injury.
BLYTHEVILLE, ARKANSAS—
NIBCO INC.
An employee's hand was caught in a pinch point in the area of a conveyor for a flask running out of a foundry molding machine. The employee's ring finger was crushed and partially amputated at the base.
PRYOR, OKLAHOMA—
American Castings, LLC
An employee noticed a block was out of place under the weighted mold frame. The employee used another block to push the block out and replace it. When the block came out, the frame came down on his right ring and little fingers. The employee sustained a fracture and partial amputation to the ring fingertip.
JACKSON, OHIO—
OSCO Industries Inc.
An employee was using a fork truck to move a tub containing molten iron that had been drained from the cupula. The tub tipped over and the molten metal came in contact with water. This caused the molten iron to splash back and burn the employee's upper torso.
More severe injuries in GEORGIA
PEACHTREE CITY, GEORGIA—
GS II Building Products, Inc.
An employee was helping to lift the grating from a floor draining system when the grating slipped and landed on his hand, resulting in the amputation of his right middle finger at the first joint.
AUGUSTA, GEORGIA—
US Battery Manufacturing Company, Inc
A casting machine jammed. An employee's hand was caught in the machine, where a belt line caught and amputated the tip of his finger.
CARTERSVILLE, GEORGIA—
Alfa Insurance
During a workshop meeting in a hotel, an employee heard a drilling noise, so he walked outside to see what it was. An explosion occurred (possible gas line) and his face, ear, and hair were burned. He also fell and sustained a pelvic fracture.
ATLANTA, GEORGIA—
EMORY UNIVERSITY HOSPITAL
An employee slipped on condensation on a walkway in a parking garage. She fell and suffered a closed fracture to the neck of the left femur.
TRENTON, GEORGIA—
Bull Moose Tube
An employee was using a tool to remove a rag from a roll on the tube mill. The roll pulled the tool and the employee's right hand into the roll, resulting in a partial amputation of the little finger and a fracture to the index finger.