Little Thailand Farms II

Two employees were working to clear land with other employees and prepping a brush pile (20 x 40 x 15 feet) to be burned. They planned to ignite the brush pile by creating a fire-line or trail with an accelerant so that the pile could be lit from a distance. After applying a gasoline-diesel mixture to the pile, one employee used a cigarette lighter to ignite the pile. Two employees suffered multiple first-degree burns to the face, ears, hands, chest, and abdomen.

An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.

An employee was transporting used filter media (containing pyrophoric iron sulfide) from an inlet gas separator in the bed of a truck. The material ignited. While the employee was removing items from the truck bed, a gas can was exposed to the fire and off-gassing vapors ignited. The employee suffered first- and second-degree burns to both arms, the chest, the neck, and the right ear. The employee was hospitalized.

An employee was using a cutting torch to heat up bolts that had seized up. The bolts caught on fire in a flash burn, and the employee suffered burns to the arms and elbows.

On August 2, 2025, at 4:59 PM, a contract painter was painting an aircraft using an electrostatic paint gun in the paint booth hangar. He was placing the gun into a container of methyl ethyl ketone to clean when the solvent ignited. The employee was hospitalized with third-degree burns to his arms and legs.

An employee was running a power washer when the tip became stopped up. The employee turned the washer off to unclog the tip, but pressure remained in the line. The clogged tip suddenly dislodged, and the residual pressure lacerated the employee's left index finger.

On or about February 11, 2015 at 3:20pm an employee suffered a broken left shoulder and hurt his left leg while working in the Press Area. He was caught in between the bag and a cotton bale while trying to put on a bag. The machine turned on automatically and pushed the cotton into the bag.

An employee was checking a pole-type transformer tank for leaks. A hydraulic clamping device was lowered onto his right thumb and crushed it against the sharp edge of the bottom of the tank. He suffered a partial transphalangeal amputation to the thumb.

The injured employee was standing behind a table. She jumped out to scare another employee, but tripped and fell on the tile floor, injuring her right ankle/foot. She was hospitalized with a dislocated ankle that required surgery.

An employee was going into a trailer to mark product for shipment and the trailer pulled away from the dock. The employee fell out of the trailer, contacted the dock plate, and then fell to the ground. The employee was hospitalized with a punctured lung, fractured ribs, and contusions.

An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.

An employee was operating a gas tugger to lift metal sheeting. His left hand was pulled into the pulley, which crushed his left thumb, resulting in avulsions and other tissue damage. He was hospitalized and required surgery.