AA Biggs & Holdings, LLC

Two employees were working to clear land with other employees and prepping a brush pile (20 x 40 x 15 feet) to be burned. They planned to ignite the brush pile by creating a fire-line or trail with an accelerant so that the pile could be lit from a distance. After applying a gasoline-diesel mixture to the pile, one employee used a cigarette lighter to ignite the pile. Two employees suffered multiple first-degree burns to the face, ears, hands, chest, and abdomen.

An employee was hot patching a tire, which involves lighting a flammable liquid on fire to patch the tire. The flammable liquid contacted his arm, and he sustained burns to his arms and face.

An employee was transporting used filter media (containing pyrophoric iron sulfide) from an inlet gas separator in the bed of a truck. The material ignited. While the employee was removing items from the truck bed, a gas can was exposed to the fire and off-gassing vapors ignited. The employee suffered first- and second-degree burns to both arms, the chest, the neck, and the right ear. The employee was hospitalized.

On August 2, 2025, at 4:59 PM, a contract painter was painting an aircraft using an electrostatic paint gun in the paint booth hangar. He was placing the gun into a container of methyl ethyl ketone to clean when the solvent ignited. The employee was hospitalized with third-degree burns to his arms and legs.

An employee was outside, participating in fire extinguisher training onsite. She extinguished a fire and then the chemical from the fire got in her face. She started coughing and was hospitalized with trouble breathing.

An employee was stopping traffic at a job site so a piece of equipment could be moved to another location when he was struck by a car. It sent him in the air and he landed on his back, resulting in hospitalization with five fractured ribs, a fractured forearm, and a liver injury.

A truck of asphalt binder was being unloaded. An employee was checking the transfer hose connection on the truck. The gasket on the hose blew out, causing the asphalt binder to shoot out and burn the employee's face, neck, and arms.

A truck driver was on a platform, pulling a tarp on an asphalt load in a six-wheel dump truck. He fell from the platform to the ground and suffered broken ribs.

On May 15, 2025, an employee was cutting down steel mesh and debris that was protruding from a milled roadway. As the employee began to cut a piece of steel with an angle grinder, he steadied himself with his left hand and the tool contacted the top of his left wrist, resulting in a laceration that required hospitalization.

An employee was installing chutes on a cement mixer when their gloved left hand was caught in the pinch point causing the chute to land and crush his fingers. The employee was hospitalized for partially severed index and middle fingers and broken bones.

After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.

An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.

An employee was inspecting flares processes. The employee received burns to the front side of the body, face and arm from the flares.

An employee was removing plastic material from a production line when the machine cycled and amputated his left index, ring, and little fingers.

An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.