WALTHAM, MASSACHUSETTS—
Crown Equipment Corporation
Struck by other falling object n.e.c. · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury at Crown Equipment Corporation, 100 1st Ave., WALTHAM, MASSACHUSETTS 02451 on — Amputations involving bone loss, affecting the Other finger(s) n.e.c..
Final narrative
An employee was replacing the drive tire on a standup forklift. He used a hydraulic jack to lift the forklift and remove the worn tire. While installing the new tire, the forklift came off the jack and pinned his left hand under the drive tire. The employee sustained a broken left hand and required surgical amputation of the little finger.
More severe injuries at Crown Equipment Corporation
NEW BREMEN, OHIO—
CROWN EQUIPMENT CORPORATION
On September 22, 2025, an employee tripped and fell over a permanent fixture (angle iron) that serves as a parking block in the back of a facility. He suffered a fractured right hip and was hospitalized.
NEW BREMEN, OHIO—
CROWN EQUIPMENT CORPORATION
An employee was training another employee on a hoist and heavy assembly operations for powered industrial vehicle manufacturing. One employee was lowering the power unit down when the injured employee's hand was caught and pinched between the power unit and a stationary piece of equipment. The employee's left thumb was partially amputated.
CLEBURNE, TEXAS—
Crown Equipment Corporation
An employee was offloading equipment from a trailer when his thumb was caught between the trailer bed and the main frame. The employee was hospitalized with an injury to his thumb that required surgery.
CELINA, OHIO—
CROWN EQUIPMENT CORPORATION
On September 16, 2022, an employee was hoisting a product from a CNC mill. The employee's left index finger was caught between the product and a positioning bolt as they guided the hoist. The employee suffered an amputation to the fingertip without bone loss.
POMPANO BEACH, FLORIDA—
Crown Equipment Corporation
An employee was servicing a lift truck for a customer at the costumer's site when the employee collided with a stationary object and suffered a broken foot.
View Crown Equipment Corporation's full OSHA safety record →
Similar incidents · Same event type
MADISON, WISCONSIN—
RG Professional Carpenter, Inc.
The injured employee was assisting five other employees with bracing a wall panel that was being stood up. Another employee slipped on frost on the floor surface. The employees went to evacuate the area in anticipation of the wall panel falling over. The injured employee went to jump through a window opening within the wall panel and their lower half was crushed by the falling wall panel. The employee sustained a fractured pelvis.
PRYOR, OKLAHOMA—
Rae Corporation
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
ATHENS, TEXAS—
Red Dot Corporation
An employee was attempting to lift a steel beam from a horizontal, stacked position to a vertical position using a crane. They had placed two hooks on the east side of the beam on the flange. As the employee was hoisting the crane, the beam began to shift and pulled the employee forward onto the stack. When the material shifted, the hooks released and the material fell, pinning the employee between the two beams. The employee was hospitalized with soft tissue contusions on their proximal right thigh and interior left thigh.
RAPID CITY, SOUTH DAKOTA—
Simon Contractors of South Dakota, Inc.
An employee was moving a tensile strength test device with a dolly. The device fell from the dolly onto the employee's right leg, causing a compound fracture.
SOUTH BOSTON, MASSACHUSETTS—
RJV Construction
An employee was rigging I-beams. An I-beam slid off the stack of I-beams and fractured the employee's leg.
More severe injuries in this industry (NAICS 423830)
MIDLAND, TEXAS—
TRC Services of Texas INC
An employee was sorting sucker rods. His right hand was caught in the area where the rod hits up against the frame and his index fingertip was amputated just below the nail.
DEER PARK, TEXAS—
Onpoint Industrial Services Hiring Center
An employee was using a powered miter saw to cut 2x4's. The saw blade hit something inside a board (possibly a hidden nail) and jumped, causing a laceration to the employee's left forearm. The employee was hospitalized with soft tissue and tendon injuries that required surgery.
TULSA, OKLAHOMA—
S&R Compression, LLC
A crane had been used to set a steel plate on a steel frame. An employee was trying to remove a clamp from the plate when the plate fell and crushed the tip of his left little finger. The employee sustained a fingertip amputation.
GIRARD, OHIO—
Morgan Engineering Systems, Inc
An employee was operating a scissor lift, raised to a height of about 15 feet, to inspect an overhead crane rail. The crane itself was being moved. Its hook swung into the scissor lift s arms, causing the lift to tip over onto its side, which in turn caused the lift and the employee to fall to the floor. The employee suffered injuries including broken ribs, spinal fractures, scapula fractures, and internal injuries.
NORTH CHARLESTON, SOUTH CAROLINA—
Fairbanks Morse, LLC
A technician was operating a crane hoist to lift/remove a cylinder head from the main engine (port). The load was lifted at an angle, causing the cylinder head to get stuck on the cylinder head studs. When it became free from the studs, the cylinder head swung. It struck the technician and caught them against the cabinet door. This resulted in an amputation of their left index fingertip at the distal knuckle.
More severe injuries in MASSACHUSETTS
CHICOPEE, MASSACHUSETTS—
A&S Services Group
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
BILLERICA, MASSACHUSETTS—
American Flowform and Machining, LLC
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
NEW BEDFORD, MASSACHUSETTS—
Acushnet Rubber Company, Inc
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
NORTHAMPTON, MASSACHUSETTS—
Warner Brothers, LLC
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
WEST WAREHAM, MASSACHUSETTS—
Roby's Propane Gas
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.