Struck by running powered equipment irregular movement, kick back · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at National Network Services, 14300 W. Orchard Pkwy, WESTMINSTER, COLORADO 80023
on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was standing on a portable ladder, using a handheld band saw to cut a piece of threaded rod in a ceiling. The saw jumped and struck the employee's hand. The employee suffered an amputation to the left index finger.
Amputation Other finger(s) n.e.c. Saws except chainsaws
An employee was cutting a board using a circular saw. The saw pinched, kicked back, and cut the employee's left ring and little fingers. The employee suffered an amputation to the little finger.
An employee was cutting wood with a circular saw. The saw kicked back, and its blade cut three fingers on the employee's right hand, resulting in an amputation.
An employee was doing a cutback on a piece of lumber using a chop saw. The saw hit a knot, the piece of lumber buckled, then kicked back and broke the kickback guard. The board was then pulled back into the blade, which lacerated the employee's left index and middle fingers.
An employee was cutting wood with a circular saw. The machine lagged and cut the employee's finger. The employee required surgical amputation of the finger at the hospital.
More severe injuries in this industry (NAICS 517919)
An employee was adjusting a cable reel that was loaded onto the forks of a forklift. The reel shifted and caught the employee's left index fingertip against the backrest, amputating it.
An employee was on an extension ladder, about 15-18 feet high, while spraying a wasp nest on a telecommunications pole. He fell to the ground and sustained fractures to his hip, requiring hospitalization.
An employee was working from a ladder, pulling a cable line through a wall at a customer's house. He lost his balance and jumped off the ladder, landed on the ground about 7 feet below, and suffered injuries to both ankles including a fracture to at least one. The employee was hospitalized.
An employee was pulling inner duct from one handhole to another. The shackle on a winch cable contacted the cable sheave's roller block. The employee released tension on the winch cable and lifted the cable to guide the shackle over the lip of the handhole. As he re-engaged the winch, his left index fingertip became caught between components in the winch's retrieval wheel. The fingertip was amputated between the last knuckle and the nail.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.