Caught, entangled in running powered equipment normal operation · Amputations involving bone loss
At a glance
Federal OSHA recorded a severe workplace injury
at Ironclad Environmental Solutions, Inc., 1842 County Road 341, ANGLETON, TEXAS 77515
on — Amputations involving bone loss, affecting the Finger or thumb tip(s), nail(s).
Final narrative
A truck driver was loading a second roll-off container onto a two-box trailer. He was operating the hydraulic control levers with his left hand, and was holding the D-ring in place on the exterior of the trailer while letting slack out of the winch cable. The employee's right little finger became pinched between the winch cable and the structure of the trailer. The employee required surgical amputation of the distal phalanx.
Amputation Finger or thumb tip(s), nail(s) Trucks with other mounted machinery, equipment n.e.c.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 541620)
The employee was working in the back of a micro truck and maneuvering around the materials in the back of the truck. The employee's foot caught on the edge of the truck, causing him to lose balance and fall from the back of the truck to the ground approximately 3.5 to 4 feet below. The employee landed on his feet on the loading dock but rolled his ankle. The employee was hospitalized with a compound fracture of the ankle.
An employee was assisting the operator of a soil sampling rig to collect soil samples. He went to remove soil sampling tooling and the energized equipment cycled. His right index fingertip was amputated including the fingernail.
An employee was sampling a fluid catalytic cracking (FCC) unit by opening a valve and placing a proving tube inside to collect the sample. The sample taken is a hot gas mixture. When the sample was collected, the flange came undone and fell due to the pressure. The employee sustained an amputation to their right middle fingertip.
An employee working at ground level was using a 4-foot angled prybar to position the top panel of an aboveground storage tank. The prybar slipped, causing the employee to fall backward to the ground. He was hospitalized with a fractured right tibia and fibula.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.