Caught, entangled in running powered equipment normal operation · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Matrix Environmental Technologies Inc., 52 Andrews Street, ROCHESTER, NEW YORK 14614
on — Amputations, avulsions, enucleations unspecified, affecting the Finger or thumb tip(s), nail(s).
Final narrative
An employee was assisting the operator of a soil sampling rig to collect soil samples. He went to remove soil sampling tooling and the energized equipment cycled. His right index fingertip was amputated including the fingernail.
HospitalizedAmputation Finger or thumb tip(s), nail(s) Drilling machines, drill apparatus
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 541620)
The employee was working in the back of a micro truck and maneuvering around the materials in the back of the truck. The employee's foot caught on the edge of the truck, causing him to lose balance and fall from the back of the truck to the ground approximately 3.5 to 4 feet below. The employee landed on his feet on the loading dock but rolled his ankle. The employee was hospitalized with a compound fracture of the ankle.
A truck driver was loading a second roll-off container onto a two-box trailer. He was operating the hydraulic control levers with his left hand, and was holding the D-ring in place on the exterior of the trailer while letting slack out of the winch cable. The employee's right little finger became pinched between the winch cable and the structure of the trailer. The employee required surgical amputation of the distal phalanx.
An employee was sampling a fluid catalytic cracking (FCC) unit by opening a valve and placing a proving tube inside to collect the sample. The sample taken is a hot gas mixture. When the sample was collected, the flange came undone and fell due to the pressure. The employee sustained an amputation to their right middle fingertip.
An employee working at ground level was using a 4-foot angled prybar to position the top panel of an aboveground storage tank. The prybar slipped, causing the employee to fall backward to the ground. He was hospitalized with a fractured right tibia and fibula.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.