Fall to lower level resulting in exposure or contact unspecified · Cuts, lacerations, punctures without injury to internal structures
At a glance
Federal OSHA recorded a severe workplace injury
at Silver Star Construction Co., East of Marietta on State Highway 32, MARIETTA, OKLAHOMA 73448
on — Cuts, lacerations, punctures without injury to internal structures, affecting the Upper arm(s).
Final narrative
An employee was working to string cable at a temporary asphalt facility. He had been taking cable from the silos to the control room. He used a ladder to get to another silo and connect a cable. He slipped on the ladder and fell. A cable-supporting hook next to the ladder impaled and tore his right bicep. The employee required surgery.
Hospitalized Upper arm(s) Portable ladders and stairs unspecified
More severe injuries at Silver Star Construction Co.
A crew of employees was cleaning out an asphalt burner/drum due to excessive buildup. The burner/drum was de-energized and was being manually turned to allow excessive buildup to fall onto a drag conveyor. Some of the large chunks became lodged on the drag conveyor, and the injured employee used a 5-foot steel bar to knock out the chunks. He reached down with his left hand when another large chunk struck his hand and pinned it between the steel bar and the drag conveyor. The employee suffered an amputation of the index finger and a laceration to the middle finger.
An employee was gathering paperwork to distribute to different offices. When she got up and walked around her chair, her foot got caught on the base of the chair and she fell. She sustained a left pneumothorax, fractured ribs, a scraped left elbow, and injury to her left hip.
An employee was lifting traffic control devices and loading them into the bucket of a skid steer when he suffered a hernia. The employee was hospitalized for surgery.
An employee was on a ladder, adjusting the upper limit switch for an ash expeller. He slipped off the ladder and his left ring finger was caught between the expeller piping and the moving ram cylinder, resulting in a finger fracture and an amputated fingertip.
An employee stood on a conveyor wall to unclog the cotton feeder. The employee fell on the moving conveyor and fractured his right arm. The employee was hospitalized.
Multiple employees were using baling buckets to remove 750 gallons of 150-degree hydraulic oil out of a pit in a confined space for approximately 5.5 hours. The injured employee was standing on a ladder performing this task when they fell feet-first into the hydraulic oil pit, resulting in burns on both legs.
An employee was climbing down a ladder. The ladder was unsecured and the employee fell, severely cutting his right arm on metal siding. He was hospitalized and required surgery.
An electrician was on a 9-foot scaffold performing valve maintenance on an 8-inch line near a heat exchanger. The electrician was working to cycle a valve that failed to close. Due to a misaligned drain line and an open manual valve, hot liquid dextrose (~250 F) was released onto the floor below, creating a steam cloud. The electrician was evacuating the scaffold using the scaffold ladder when they slipped and fell 5-6 feet into the hot liquid, sustaining first- and second-degree burns to multiple parts of their body including both arms, both hands, their back, and their buttocks.
More severe injuries in this industry (NAICS 237310)
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.