Caught, entangled in running powered equipment normal operation · Amputations, avulsions, enucleations unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Axis Energy Services, Calyx Energy III, LLC - Woods #3 16-4WH, BACHE, OKLAHOMA 74501
on — Amputations, avulsions, enucleations unspecified, affecting the Other finger(s) n.e.c..
Final narrative
An employee was working on a rig crew. They were positioned on the rig work floor, helping to connect tubing to a power swivel. While the employee was making a horizontal connection, their left hand was positioned on the winch line that was secured to the power swivel. As the swivel rotated, the winch line chain became tangled, pinching the employee's left little finger and resulting in an amputation.
Amputation Other finger(s) n.e.c. Rotary system equipment
An employee arrived on location and loaded a blow-out-preventer (BOP) on a 1-ton flatbed truck. While standing on the flatbed securing the the BOP, the employee stepped into a void/hole on the flatbed surface. This caused him to lose balance and fall off the truck bed with his leg still caught in the hole. As a result, he sustained fractures to his left leg.
An employee was pulling and positioning the first joint of pipe (30-foot joint of 2-7/8 tubing) at the end of the pipe racks so that it could be lifted at a later time. The pipe was stacked three layers high. The pipe from top layer rolled and three joints of pipe fell at the opposite end of the pipe racks. The employee reached to stop the pipe from falling at the end where he was standing and his right little finger was crushed between the pipe and the pipe rack pin. The employee's finger was amputated.
During maintenance of an annular blowout preventer, air pressure was applied to dislodge a stuck internal piston. The piston ejected and struck an employee's left bicep, causing a laceration and a fracture.
A crew was utilizing a forklift to install fence barriers around a well. The carriage of the forklift was being used to push down on the fence frame and push the legs of the barriers into the feet slots in the ground. The injured employee was signaling the forklift operator with his left hand while his right hand was on the barrier next to the one being installed. The forklift was pushing down on the barrier when the carriage slipped and contacted the injured employee's right index and middle fingers, resulting in amputations.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 213112)
An employee had been cleaning the work area. While lifting a saw, the employee's index finger was lacerated by the saw blade. A tendon was cut and required surgery.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.
An employee was using a torch to loosen a bolt on a water trailer. Natural gas was present in the water and it ignited, causing a fire. The employee sustained third-degree burns to their upper leg.
An employee had been conducting crane operations. The employee went to stop a piece of oil and gas equipment for tubular running from falling over to the ground. Their right hand was caught between a rolling ladder and the equipment, resulting in fractures to the index and middle fingers. They were hospitalized and the middle finger required surgery.
An employee was working to install a drive belt on a water pump. He was holding the belt on both sides of the pulley, working to route it over the top. As he pulled down with his right hand, the pulley rotated and the belt slid over it, pulling his left little finger between the pulley and the belt. He suffered an amputation to the fingertip as well as a fracture to the ring finger.
An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.
An employee was working in the food service warehouse when he experienced chest pain, difficulty breathing, and lost consciousness. The employee sustained carbon monoxide poisoning.
An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.
An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.
An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.