Caught, entangled in running powered equipment normal operation · Nonfatal 'crushing' injuries
At a glance
Federal OSHA recorded a severe workplace injury
at Channellock, Inc., 1306 South Main Street, MEADVILLE, PENNSYLVANIA 16335
on — Nonfatal 'crushing' injuries, affecting the Hand(s), finger(s) unspecified.
Final narrative
An employee was positioning a part inside a restrike hammer (full revolution drop hammer). The employee was wearing his safety pullout devices (metal cable with wristlets) at the time. As the employee positioned the part inside the die, he tripped the machine with his palm. As the ram went to drop, his pullout device (cotton rope connection) broke away from the press and his right hand was crushed by the top die as it fell. The employee was hospitalized and required surgery.
An employee was helping to install a forging hammer sow block. He was standing near the hammer and guiding a forklift operator who was manipulating the suspended block. The employee was directing the forklift backward to realign the block and had his hand on top of timber that was connected to the load strap. As the block was coming out, it contacted the bottom of the hammer and caused the timber to rotate. The employee's hand was crushed between the timber and the forklift tine.
An employee was operating a metal roller machine to roll a small piece of metal. The employee's right index finger became caught between the metal and the machine, and the fingertip was amputated.
An employee was working on a production line. The employee went to retrieve parts that came out of the parts holder, and their left hand became caught between a chain and a sprocket. Three fingers on the hand were amputated.
An employee was hooking up bundled tie-downs with a chain. While he was holding a hook, the other hook was unlocked. This caused the employee's hook to slide down and pinch his right index finger between the chain and the shackle. He suffered an amputation to the fingertip (without bone loss), as well as an open fracture.
An employee was operating a pad printer. The employee's finger was caught in the printer and they suffered a fingertip amputation. The part of the printer that caught the employee's finger was unguarded at the time.
More severe injuries in this industry (NAICS 332216)
An employee was removing the bottom die from an auto hammer. He was pushing the die out with his left hand when the die bar slipped and fell on top of his left index finger, resulting in a fingertip amputation.
An employee was troubleshooting a coolant door fault on a machine when the right door actuated and crushed his right index finger, causing an amputation to the finger.
At about 9:00 a.m. on March 10, 2025, an employee was operating a lathe when a part jammed inside it. The employee was removing the jammed part when the machine's slide shifted, causing the lathe spindle to amputate his left ring fingertip.
An employee was walking into the motor control center (MCC) room when his right ring finger was caught in the hinge of a doorway. He sustained an open phalanx fracture, which resulted in a partial amputation above the first knuckle.
An employee was changing the spacing on a telehandler's forks. A fork slipped, and the employee's left index finger was caught between it and the mast. The fingertip was medically amputated at the first knuckle.
An employee was pulling down a broken skid with a forklift. When the employee backed up the forklift to get the forks out of the skid he pulled down, he contacted the forks of another parked forklift, fracturing both of his legs. He was hospitalized.
An employee was carrying cups back to the kitchen when her foot got caught on a cart and she fell face-first. During the fall, a piece of glass from a cup cut the inside of her mouth, severing an artery. She also sustained a laceration on her lower lip. The employee was hospitalized.