Employee 1 was operating a dozer's winch from inside the cabin. While attempting to unhook from a D-ring, he had to loosen the tension of the cable. Upon doing so, employee 2 walked over to the winch and grabbed the cable with her left hand. When employee 1 moved the controls to spool out the winch, employee 2's left hand was pulled into the cables. Employee 2 sustained a broken left ring finger and a partial amputation to her left little finger.
An employee was tasked with welding a pipe. As he was getting a cutting torch from a toolbox on a buggy, he became caught between the side boom of a pipelayer and the buggy. He suffered internal bleeding and damage to his small intestine, requiring hospitalization and surgery.
An employee was standing on the offloading side of a bending machine. The counterweight of a side boom that was backing up came into contact with the machine's radiator. This caused the bolts to break loose from the mount, pushing it forward into the employee's waist. He fell forward into the fan area with his left elbow leading; the elbow suffered a gash/laceration.
An employee was cleaning off a pallet sorting machine. The employee jumped approximately two feet from the top of the pallet sorting machine to a lower platform. Upon landing, the employee's left ankle rolled, resulting in a fracture that required hospitalization.
An employee was working from the forth rung of an 8-foot step ladder installing radiator covers when the cover began to fall. The employee lost balance and jumped from the ladder, landing on his feet and sustaining a heel fracture.
An employee was standing on their flatbed truck adjusting a cargo pallet. He pulled one of the pallet boards and the board broke, causing the employee to lose his balance and jump 4 feet off the flatbed. The employee landed on a concrete surface and sustained a fractured left heel that required surgery.
An employee was cleaning a single screen machine that had been jammed by a garden hose. The employee exited the machine onto the belt guard and jumped from the belt guard to the ground three feet below. When he landed, he broke his left femur.
An employee was on a catwalk helping to lay down tubing when he lost his balance. The employee jumped approximately 42 inches to the ground and the 30-foot section of tubing struck his left shin resulting in a fracture that required surgery.
More severe injuries in this industry (NAICS 237120)
An employee was acting as a spotter for a forklift operator. While its forks were being raised, the forklift came into contact with a power line. The employee was touching the forklift's metal frame at the time and was shocked on the left palm. The employee suffered burns to both the left palm and the sole of the left foot.
An employee was working as a fire watch. The employee was exposed to anhydrous ammonia and was not able to see while climbing down a ladder due to eye irritation. The employee fell and was hospitalized for a broken ankle.
An employee was standing on the ground awaiting the lowering of a pipe. After the pipe was lowered to the ground by a skid steer, it rolled and struck the employee's left leg. The employee was hospitalized with a fractured leg.
An employee was tightening a gas pipe with a wrench when the wrench slipped from his hand. The employee's arm then hit a metal cross-brace, resulting in a lacerated arm.
After cutting a slab of beef short ribs, an employee turned to grab the pieces he had cut and his right hand contacted the saw blade. The employee sustained an amputation to his right index finger.
An employee was unloading a carpet pad from a truck when they fell from the truck dock to the concrete below, resulting in five fractured ribs and an injury to their left lung.
An employee was walking up a walkway to enter a building through the back entrance when she tripped over the lip of the cement ramp. The employee fell and sustained a fractured right hip.