The Roark Group Inc.

On December 15, 2023, the injured employee was working from a ladder. A co-worker climbed the backside of the ladder and the ladder failed. The injured employee fell approximately 8 feet to the ground and sustained multiple fractures.

An employee was installing grout using a shovel when the precast hollow-core floor gave way, causing them to fall approximately 8-10 feet. The employee sustained a back fracture.

An employee was assisting with assembly of a two-level scaffold. The scaffold fell, causing the employee to fall 8 feet from the second level to the concrete surface below. The employee sustained fractures to the face, jaw, and both wrists.

An employee was repairing an egg collector when the platform collapsed and he fell 10 feet to the concrete floor. The employee sustained a fractured left leg.

An employee was descending a ladder when it collapsed, causing him to fall approximately 8 feet. The employee was hospitalized with a compound fracture to his left leg and a left wrist fracture.

An employee was imprinting coffee mugs using a screening machine when a piece of paper fell out of the cup. The employee went to retrieve the piece of paper and the screening machine pushed her right hand against the wall of the machine. The employee sustained compartment syndrome in her right forearm.

An employee was performing maintenance tasks on a roof in the rain. As the employee was descending the ladder, he slipped off a rung and fell, landing on both feet. The employee's right heel and left ankle were fractured.

An employee was operating a screening machine. He was removing a dropped rag from the machine when his arm was caught and broken between a rotating bar and a stationary part in the machine.

An employee was in an aerial lift's metal bucket, installing a banner on the side of a building. The employee finished placing the banner and pulled back to take a picture. The aerial lift came into contact with a power line; the employee was shocked, suffering second-degree burns to the chest and head.

Two electricians/journeyman mechanics were doing preventative maintenance on a high-density storage system, an aisle with two cranes. They were preparing to lubricate the chains on one of the cranes. One of them was on the lift station, seated above the crane on a cross-support bar to perform lubrication and test the vertical limit switch. He tripped the vertical limit switch to begin the work. The crane and the lift station began to move up, and his right leg was pinned and broken between the frame of the crane and the crossbar of the lift station.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.