Pedestrian struck by vehicle in work zone, unspecified · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at J.H. LYNCH & SONS, INC., Route 95S, SHARON, MASSACHUSETTS 02067
on — Fractures, affecting the sacral region.
Final narrative
An employee working on a road construction project cleaning up after concrete chipping was struck by the street sweeper and suffered a broken sacrum.
HospitalizedSacral regionStreet sweeping and cleaning machinery
An employee was cleaning a paving machine's hopper with a shovel. The employee noticed that the "auto" button was activated and tried to shut it off. The machine's front apron came down and caught the employee's right foot against the front bumper. He suffered a broken right foot, a broken left collarbone, and a burned right hand.
Two employees were using ATVs to help transport a 236-foot length of pipe. One ATV struck the other, causing it to roll over; its driver suffered broken legs, a broken pelvis, and a hand laceration. The driver was hospitalized. One of the driver's legs was amputated.
An employee was breaking down traffic control equipment on a county road. A car struck the employee, who suffered a right knee dislocation (with soft tissue involvement) and a lacerated left forearm, along with abrasions and other lacerations.
On November 10, 2023, an employee was flagging and directing temporary traffic controls on a natural gas line replacement project. The employee was struck by a motor vehicle and sustained multiple injuries including an internal tear to an artery, a shoulder injury, and a broken leg.
On November 9, 2023, an employee was picking up cones and equipment from the roadway in a work zone when they were struck by a motor vehicle. The employee sustained a fractured right leg.
A dump truck driver was standing inside a designated work zone while cleaning out the bed of the truck when they were struck by a car and sustained a traumatic brain injury and fractures.
An employee was in the road looking inside a manhole when they were struck by a box truck. The employee sustained injuries to his head, jaw, and pelvis that required hospitalization.
More severe injuries in this industry (NAICS 237310)
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee was cleaning out an inlet pipe in a stormwater structure. The employee stepped back, fell into the pipe, and landed on concrete 13 feet below, at the bottom of the structure. He suffered a broken back.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was working with paving equipment and heard a noise on the opposite side of the machine he was working on. When the machine stopped, the employee went to the opposite side and crouched down to investigate the noise. A mini track loader backed up and drove over the employee's leg. The employee sustained fractures to their lower leg, ankle, and foot.
An employee fell while exiting a trailer. The employee landed on their left side on the pavement, suffering multiple broken ribs on the left side. The employee was hospitalized.
Two employees were setting up a mandrel in the spindle of a machine. The mandrel was side-shifted while an employee's hand was on the mast of a powered industrial truck. The employee suffered crushing injuries that resulted in amputations to the middle and ring fingertips.
An employee had been loading a double deck press. The employee saw a mold had been sent in with the C-hook still attached on the belly bar. As he went to remove the hook from the mold, his right thumb got caught on the C-hook. The employee's thumb was partially amputated.
An employee was operating a roller and paving a small pathway next to a pavilion. The ground was on a slight pitch, causing him to reach up toward the roll cage to stabilize himself. His right fifth finger was pinched between the roll cage and the rafter of the pavilion. The employee sustained a partial degloving injury with partial traumatic amputation.
An employee was delivering home heating fuel when bees came from the ground and stung the employee's face, neck, torso, and hands. The employee proceeded to shut off the oil flow before losing consciousness. They were hospitalized due to an anaphylactic reaction.