Central Moloney Inc

An employee was stapling boxes when he lost his balance and the staple gun shot staples into his leg, resulting in a laceration to the right leg.

An employee was operating a pneumatic chop saw when his hand was struck by the blade, resulting in the amputation of all four left hand fingers at the lowest knuckle.

An employee was working on a production line when he began experiencing cramps in his legs and subsequently throughout his body. The employee was hospitalized due to heat stress.

An employee was hooking a welder gun into a feeding wire. The feeder caught the employee's right thumb, which was amputated. The employee was hospitalized.

An employee was clearing a jam on a shearing machine when the machine actuated via the foot pedal. The employee's left index finger was in the point of operation and was amputated between the first and second knuckle.

An employee was inspecting a bridge repair project. A gas-powered, walk-behind pavement saw, being used 12 feet away from the employee lunged forward, cutting his left foot. The employee's fourth toe was amputated and he was hospitalized.

An employee had been reviewing an insulated glass unit. The employee was placing the glass unit back in its box when it slipped out of the box and a chipped corner lacerated the employee's left hand.

An employee was on a truck while using a clamp to secure a quartz slab to an A-frame on the truck. A gust of wind pushed the slab onto the employee, resulting in a dislocated right shoulder and wrist.

An employee was shearing off two inches of metal when the metal kicked up and struck his hand. The employee's left ring and middle fingertips were amputated.

An employee was working on a 35,000-pound I.D. fan. As the employee rotated the blades with his foot, the blades continued to spin, lacerating his right foot and amputating a toe.

An employee was being trained on a winding machine when his glove became stuck on tape. While freeing his glove, the machine was activated and started winding. His arm was pulled into the machine, resulting in a fractured left forearm.

The injured employee was cleaning up tools and equipment around a transformer that was being assembled. Other employees were removing the mobile work platforms from around the connections lattice of the transformer. The connections lattice fell over on top of the injured employee, causing fractures to their ribs, pelvis, and foot.

An employee was preparing to remove enamel from copper leads by soaking them in a liter container of formic acid when one of the bottles fell. The employee was splashed with formic acid, resulting in first- and second-degree burns to his face.

An employee was using a crane and an L-shaped lifting device to remove a coil of aluminum material off a de-reeler. The L-shaped lifting device got hung up on part of the de-reeler. The L-shaped lifting device slipped off and struck the employee in their right side. The employee sustained internal lacerations to their liver and kidney.

An employee was setting up a machine. The machine's jog function was activated while the employee's left hand was on the rotating table of the machine, and the hand was pulled into the next station of the machine. The employee was hospitalized with a laceration to the wrist that cut an artery, and they required surgery. The machine was not locked out/tagged out at the time.

An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.

On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.

An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.

An employee was helping two other employees to push a pallet of tile on a loading dock. He suffered a broken fibula and was hospitalized.

On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.