Compressed or pinched by shifting objects or equipment · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at HOOPER CORPORATION, 16th and Pearl, DENVER, COLORADO 80218
on — Fractures, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was helping to set two risers for a new underground utility vault when the operator lowered the riser onto his hand, fracturing his left index finger. He was hospitalized with hand swelling.
An employee was climbing a utility pole to conduct maintenance work and made contact with the electrical line. The employee was hospitalized for electric shock with burns to his right hand and wrist. Personal protective equipment was not worn at the time.
An employee was trimming tree branches at a client property. The employee was climbing the tree when they fell 10 feet to the ground, suffering fractured vertebrae.
An employee was loading HVAC components onto the back of a flatbed truck using a forklift. The employee got onto the flatbed to adjust/position the pallet to make room for a second pallet. The materials on top of the pallet shifted and moved toward the employee. The employee then jumped off the flatbed to the pavement four feet below, resulting in a fractured left tibia.
On August 12, 2024, an employee was traveling in a boom lift through a substation when it contacted an angle iron brace. The employee's body was caught between the brace and the boom lift controls and they sustained a fractured jaw.
An employee was working on a 120-volt secondary line from the bucket of a line truck when they contacted the line and sustained an irregular heart rhythm.
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 237130)
An employee was terminating cables in a junction box. A loose ground wire came into contact with the bushing, causing a flash that burned the right side of the employee's face and his right hand.
An employee was using a bucket truck hoist to raise secondary aerial wiring. The wire made contact with the primary wire, causing an arc flash. The employee suffered burns to both hands and was hospitalized.
An employee was terminating conductors to buss bars inside the secondary compartment of a single-phase transformer. An arc flash occurred, causing burns to the soft tissue of the employee's face.
An employee was securing the claw of a grapple truck to the truck bed. His left little finger was caught between the tie down strap and the rub rail of the truck, resulting in partial amputation of the finger.
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.