GREELEY, COLORADO—
Kuhn North America
Caught in running equipment or machinery, n.e.c. · Cuts, lacerations
At a glance
Federal OSHA recorded a severe workplace injury at Kuhn North America, 701 Cherry Ave., GREELEY, COLORADO 80631 on — Cuts, lacerations, affecting the hand(s), unspecified.
Final narrative
An employee was using a portable grinder to cut a metal stand when the grinder wheel shattered and caught his glove, pulling his hand into the grinder blade. He required surgery and hospitalization for a hand laceration.
More severe injuries at Kuhn North America
BRODHEAD, WISCONSIN—
Kuhn North America
At about 11:00 p.m., on January 23, 2019, an employee was moving stock with a forklift. The employee dismounted the forklift and some tube stock slid off the forks, striking the employee's right foot and causing amputations to the big, first, and second toes. Steel toe boots were being worn at the time of the incident.
View Kuhn North America's full OSHA safety record →
Similar incidents · Same event type
MIDLAND, TEXAS—
Scout Surface Solutions
Employees were assembling and testing a butterfly valve unit and actuator combo. When the unit was function tested with air, the valve gate closed on an employee's left thumb resulting in a fracture and laceration.
CHESTER, ILLINOIS—
Gilster-Mary Lee Corporation
An employee was doing a daily inspection of the sifter screen on a mixer when the mixer line activated. The armature for the screen struck the employee's right wrist. Their wrist was cut and their hand was fractured.
DALLAS, TEXAS—
Maxwell Paper Products Co
An employee was being trained on a machine when a roller came down on their hand, resulting in a fracture and laceration.
CONESTOGA, PENNSYLVANIA—
Turkey Hill LLC
An employee was doing a dry run during the setup of an ice cream machine. The machine indexed and the filler head amputated the employee's left middle finger above the last knuckle.
ERIE, PENNSYLVANIA—
Erie Strayer Company
An employee was on a 3-foot ladder guiding cable onto a spool during installation on an overhead door. As the control box was jogged, the employee's hand was caught between the cable and spool, resulting in a wrist and hand fracture.
More severe injuries in this industry (NAICS 333111)
WINFIELD, ALABAMA—
King Kutter, Inc.
An employee was welding lift arms when their shirt caught fire due to welding sparks or heat, resulting in thermal burns to their upper chest.
WICHITA, KANSAS—
White Star Machinery
An employee was climbing up a fixed ladder alongside a building to inspect a roof leak. The employee fell off the ladder and landed on the ground about 15 feet below. The employee was hospitalized with fractures to both wrists.
SALINA, KANSAS—
Great Plains Manufacturing Inc.
On September 16, 2025, an employee went to pull a weld stand when he tripped and fell, landing on the floor on his right hip. The employee suffered hip and fibula fractures that required hospitalization and surgery.
LINDSAY, NEBRASKA—
Lindsay Irrigation Solutions, LLC
An employee was accessing a tensioned hook that required a hoist mechanism to be engaged. He was unhooking the lift hook from a shelf column when the "up" button was pressed, which released the tension on the pneumatic air hoist. The employee's right index finger was caught between the hook and the column, resulting in a soft tissue amputation and fracture to the fingertip.
HASTINGS, NEBRASKA—
T-L IRRIGATION CO.
A crane was lifting a pole out of a zinc bath in the galvanizing department when the chain attached to the pole broke. The pole fell back into the bath and liquid zinc splashed onto an employee, who suffered third-degree burns to an arm, the abdomen, the torso, the upper left side of the chest, an ear, the neck, and a hand.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.