GREELEY, COLORADO—
JBS SWIFT
Compressed or pinched by shifting objects or equipment · Crushing injuries
At a glance
Federal OSHA recorded a severe workplace injury at JBS SWIFT, 800 N 8TH AVE, GREELEY, COLORADO 80631 on — Crushing injuries, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was investigating the cause of a mechanical malfunction on a centrifuge used to process waste water. While the employee was pulling on a belt and pulley mechanism, the weight of the belt crushed the employee's left index finger, requiring surgery and overnight hospitalization.
More severe injuries at JBS SWIFT
GRAND ISLAND, NEBRASKA—
JBS Swift
An employee entered the drive alley to close the gate. The cattle turned back and struck the gate catching the employee between the gate and the wall. The employee sustained multiple rib fractures and a traumatic pneumothorax.
GREELEY, COLORADO—
JBS SWIFT
An employee was loading grease into a tanker. The employee was splashed with the grease and suffered severe burns to the right arm and hand. The employee was hospitalized.
GRAND ISLAND, NEBRASKA—
JBS Swift
An employee was unjamming a beef hide from a flesher machine when the flesher wheel closed on the employee's arm, fracturing the upper arm and wrist. The machine was guarded at the time of the incident, but was not locked out.
GREELEY, COLORADO—
JBS SWIFT
An employee was sitting in a chair when a 66-pound box fell out of a modular stacking system onto the employee's head. The employee suffered a head injury.
GREELEY, COLORADO—
JBS SWIFT
An employee was performing walking cuts on the kill floor. As he attempted to make a cut, he missed and contacted the knife of a coworker, lacerating his right forearm.
View JBS SWIFT's full OSHA safety record →
Similar incidents · Same event type
MECHANICSBURG, PENNSYLVANIA—
TForce Freight
An employee was operating a forklift and unloading a truck. After the truck was unloaded, the employee got off the forklift and proceeded to adjust the dock plate with a hook tool. The dock plate slipped and the employee went to adjust the plate with their hand when their left middle finger got caught. Their finger was amputated above the first joint.
DELAWARE CITY, DELAWARE—
Liveo Research, Inc.
An employee was rotating a carbide granulator blade when his finger was caught between the blade and a stationary part of the machine. The employee's right middle finger was partially amputated and they suffered an avulsion to the right ring fingertip.
FORT WORTH, TEXAS—
Best Pump and Flow
An employee was using a CNC metal lathe machine in manual mode to check that the thread blocking tool made contact with the jaws. As the employee was manually spinning the spindle, his index fingertip was crushed between the spindle's jaws and the grooving insert, resulting in a fingertip amputation.
BUFFALO, NEW YORK—
FORD MOTOR COMPANY
During a material handling operation, an employee's fingertip was caught under an air conditioning unit as the unit was lowered onto a cart. The employee's fingertip was amputated.
UNADILLA, GEORGIA—
Lasseter Tractor Company. Inc.
An employee was removing a bolt from a tractor hub when their right index finger was caught between the hub and the frame. The employee's fingertip was crushed and the employee was hospitalized.
More severe injuries in this industry (NAICS 311611)
AMARILLO, TEXAS—
Tyson Fresh Meats, Inc.
An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.
IDAHO FALLS, IDAHO—
Intermountain Packing, LLC
An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.
DODGE CITY, KANSAS—
Cargill Meat Solutions Corporation
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
SOUDERTON, PENNSYLVANIA—
JBS Souderton, Inc.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
CRETE, NEBRASKA—
Smithfield Foods
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
More severe injuries in COLORADO
GREELEY, COLORADO—
ABC Supply Company
An employee was delivering materials. He was doing his pre-delivery inspection on the roof of the jobsite (a warehouse) when he fell through a plexiglass skylight. He landed on his feet on the concrete floor 14 feet below. The employee sustained fractures to his spine, left ulnar/radius, and right heel. The employee required surgery.
BOULDER, COLORADO—
Burke Builders Inc
An employee was cutting cabinet trim using a table saw when four fingers on his left hand were severed, resulting in hospitalization and amputation.
LONGMONT, COLORADO—
Circle Graphics, Inc.
An employee was removing packaging from a roll of printing substrate. The blade of their utility knife got stuck. The employee used both hands to free the knife and the blade partially amputated their left little fingertip.
DENVER, COLORADO—
FLATIRON CONSTRUCTION CORP.
A concrete batch plant operator was assisting with clearing spoil piles using a skid steer. The skid steer backed into a stationary screen plant. The employee's left little finger was crushed between the controls of the skid steer and the screen plant, resulting in a fracture and laceration. The employee's finger was surgically amputated.
BURLINGTON, COLORADO—
Takkion OPS Management
An employee was standing on an extension ladder, using a torquing tool to remove bolts that secured blades to a rotor. When the torquing tool activated, its reaction arm came around and pinched the employee's right middle finger against a lifting eye. His fingertip was amputated.