Caught in running equipment or machinery during maintenance, cleaning · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at JBS Swift, 555 South Stuhr Road, GRAND ISLAND, NEBRASKA 68801
on — Fractures, affecting the wrist(s) and arm(s), n.e.c..
Final narrative
An employee was unjamming a beef hide from a flesher machine when the flesher wheel closed on the employee's arm, fracturing the upper arm and wrist. The machine was guarded at the time of the incident, but was not locked out.
HospitalizedWrist(s) and arm(s), n.e.c.Butchering machinery
An employee entered the drive alley to close the gate. The cattle turned back and struck the gate catching the employee between the gate and the wall. The employee sustained multiple rib fractures and a traumatic pneumothorax.
An employee was loading grease into a tanker. The employee was splashed with the grease and suffered severe burns to the right arm and hand. The employee was hospitalized.
An employee was sitting in a chair when a 66-pound box fell out of a modular stacking system onto the employee's head. The employee suffered a head injury.
An employee was performing walking cuts on the kill floor. As he attempted to make a cut, he missed and contacted the knife of a coworker, lacerating his right forearm.
An employee was investigating the cause of a mechanical malfunction on a centrifuge used to process waste water. While the employee was pulling on a belt and pulley mechanism, the weight of the belt crushed the employee's left index finger, requiring surgery and overnight hospitalization.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 311611)
An employee was scraping dried glue from the top lid of a hot glue pot. His left hand slipped and came into contact with the hot glue. He then suffered burns to his hands and fingers as he tried to remove the glue. He was hospitalized.
An employee was in a scissor lift approximately 20 feet above the ground to place a plastic tarp on a catwalk in order to catch condensation. They positioned the lift opposite the work area and stepped out of the scissor lift onto an I-beam. The employee fell from the I-beam to the ground. The employee was hospitalized with a skull fracture on the right side of their head and injuries to the chest and both eyes.
A maintenance employee was called to look at a pallet conveyor machine where a chain had fallen off a sprocket wheel. When the employee grabbed the loose chain, a light sensor caused the machine to restart. This created a pinch point between the chain and sprocket that caught the employee's left little finger. The finger was surgically amputated at the second knuckle.
The injured employee was standing by one of the stationary computers along the wall. There was a half-pallet located approximately 3 feet behind the employee that consisted of 12-pound boxes stacked six boxes high. A forklift was transporting a pallet that came in contact with the stationary pallet behind the injured employee, causing four boxes to fall and contact their legs. The injured employee was hospitalized with leg injuries.
An employee was using a box strapping machine to place straps on boxes when his right middle finger was caught in the machine, resulting in an open fracture to the distal phalanx.
An employee was stacking concrete blocks for a concrete bunker. As a block was swinging into place, the employee's left leg was pinched between two blocks, resulting in injuries to his left heel and lower leg.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was filtering a fryer with a fryer filter machine. After going around the corner and then returning to the fryers, the employee stepped into the filter machine. The hot oil burned the employee's right ankle, and the employee was hospitalized.
An employee was cleaning out corn from a grain bin. The sweep auger in the bin was activated and caught his trouser leg. His leg was pulled into the auger, which injured his calf and caused leg fractures and lacerations.