Other fall to lower level 11 to 15 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at AFFTON TRUCKING INC., 123 Osage, KANSAS CITY, KANSAS 66105
on — Fractures, affecting the upper and lower limb(s).
Final narrative
An employee slipped from and fell 11 feet from the top of a railroad tank car to the ground. The employee fractured both heels and the left wrist.
HospitalizedUpper and lower limb(s)Train, locomotive, rail car, unspecified
The employee was on top of a rail car to level the grain that was deposited into the car when they fell 13-15 feet to the ground. The employee sustained a right leg fracture.
An employee was on an extension ladder installing a satellite dish on a roof when they fell approximately 12-15 feet to the ground. The employee sustained fractures.
An employee was setting a 5-foot pry bar into a precast concrete slab and stood on the end of the pry bar to move the slab into place. The pry bar slipped out causing the employee to fall backward 15.5 feet to the dirt ground. The employee was hospitalized with a broken leg.
An employee was on a step ladder to measure and mark a crane rail for modification. The employee fell approximately 12 to 15 feet to the ground, resulting in a fractured right hip.
An employee was on a trailer securing a load of logs when they fell approximately 9-12 feet to the ground. The employee sustained brain hemorrhaging and lacerations to the thigh and above the eye. The employee was hospitalized.
More severe injuries in this industry (NAICS 484230)
A truck driver was preparing a hose to load a chemical tanker trailer with sulfuric acid when sulfuric acid splashed the left side of their face and neck, causing skin burns.
An employee was disconnecting steam lines from a bulk liquid trailer. He disconnected a steam line located on a vapor recovery line when hot steam blew back onto him, resulting in burns to the left side of his abdomen, as well as his left arm and leg. The employee was hospitalized.
An employee was driving a truck when it lost power. He pulled over, opened the hood, checked the engine, and opened the radiator cap. Pressure in the radiator caused hot fluid to spew over the employee, who suffered second-degree burns to the left arm, hand, and leg.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.