Vehicle or machinery fire · Second degree heat (thermal) burns
At a glance
Federal OSHA recorded a severe workplace injury
at CBRE, Inc, 30 Broad St, NEW YORK CITY, NEW YORK 10004
on — Second degree heat (thermal) burns, affecting the nonclassifiable.
Final narrative
An employee was adjusting air conditioner vents when the malfunctioning unit caught on fire, causing second degree burns.
An employee was troubleshooting an electrical panel when an arc flash occurred and the employee lost consciousness. The employee also sustained burns and was hospitalized.
An employee was walking at ground level toward a manhole, carrying a manhole removal device. The employee tripped and fell onto the manhole removal device, resulting in multiple fractured ribs and a punctured lung.
An employee was using a 71.3-pound jackhammer to break up a concrete pad. The jackhammer became stuck in the concrete. The employee tried to pull the jackhammer out of the concrete and sustained a hernia requiring hospitalization and surgery.
An employee was ascending a ladder to access wiring on top of a chiller unit when they fell to the ground. The employee sustained internal bleeding near their hip and a broken rib.
An employee removed the spark plugs and was rotating an engine to evacuate condensate from the cylinders. An unknown source ignited the condensate and natural gas. The employee sustained burns to the back of his hands and upper leg area.
An employee was operating a front-end loader when a hydraulic line broke, causing the front-end loader to catch on fire. The employee jumped from the cab to the ground and sustained fractures to the T-6 vertebra and a heel.
An employee was moving two totes of turpentine. Noticing that one of them was leaking, he stopped his forklift and began to look for the leak. The forklift caught fire, and the employee suffered severe burns. He was hospitalized.
An employee was performing maintenance on a machine when part of an adjacent machine caught fire. The employee extinguished the fire and suffered smoke inhalation.
More severe injuries in this industry (NAICS 531312)
An employee was walking to inspect ceiling light fixtures and tripped on a 3'x5' mat that was covering an electrical cord. The employee fell and fractured their hip.
An employee was using an auger machine on an outside sewer line. While he was feeding metal rope into the sewer line, the rope came back and pulled his hand in, cutting his left middle finger. The finger was amputated from the distal joint to the tip.
An employee was moving an air conditioning unit into storage. A wooden 2x4 that was in storage fell and struck the employee's head, causing a brain bleed.
An employee was operating a battery-powered broom to clean demolition debris off the top of the outermost bridge girder. The girder was approximately 11 feet above the demolition scaffold below. The employee fell approximately 8 feet to wind bracing below. The employee was hospitalized with a pelvis/tailbone fracture. Fall protection was in place at the time.
An employee slipped while descending in a stairwell, fell, and suffered multiple contusions/bruises to the head, neck, shoulders, knees, and back. She was hospitalized.
An employee was directing trucks as they entered and left a highway work zone. A vehicle struck them, resulting in multiple fractures and other injuries. The employee was hospitalized.