Contact with hot objects or substances · Heat (thermal) burns, unspecified
At a glance
Federal OSHA recorded a severe workplace injury
at Dana Container Inc., 7703 West 59th Street, SUMMIT, ILLINOIS 60501
on — Heat (thermal) burns, unspecified, affecting the multiple body parts, n.e.c..
Final narrative
An employee was removing a steam connection. The employee removed the fitting and was exposed to steam, suffering burns to the torso, right forearm, and right side of the face. The pressure in the line was not relieved at the time of the incident.
HospitalizedMultiple body parts, n.e.c.Steam, vapors-nonchemical
An employee was standing on top of a truck tanker investigating the process. A steam valve opened causing steam to come out of the oil tanker's dome lid. The employee sustained second-degree burns from steam and oil residue.
An employee slipped and fell while removing spots from the floor of a cargo tank barrel. The employee landed on a thermometer rod and was hospitalized with bruised ribs and a right side lung puncture.
An employee was stepping from the top of a cargo tank trailer onto the top rung of a ladder when they fell approximately 12 feet to the ground. The employee suffered multiple fractures to the right arm that required surgery.
An employee was transferring sulfuric acid from a railcar to a cargo tank trailer. When the railcar was empty, the employee removed the product transfer hose. While removing the valve fitting, sulfuric acid (in the form of a mist) sprayed out and contacted the employee's face and upper torso. The employee was hospitalized for chemical burns.
An employee was reducing pressure on an over-the-road tank truck for unloading purposes. Due to an over-pressurization event and/or a defect, a 3-inch stainless steel washout pipe nipple cap failed and struck the employee in the face. The employee was hospitalized with head injuries.
An employee connected a steam line to a hose to clean equipment when the fitting broke loose. They were struck by steam in the left inner thigh, resulting in burns that required hospitalization.
An employee was making tea when she noticed tea grinds were collecting on the side and water was no longer dripping through the funnel. The employee was checking the funnel when boiling water and tea grinds spilled onto the left side of her body. The employee sustained burns to her neck, back, and arm.
An employee had turned off the ball valve on a waterpipe system and was removing the plug when the coupling system attached to the strainer came apart. Hot water sprayed on his arm and back, resulting in first- and second-degree burns that required surgery.
An employee was using a shovel to remove waste vermiculite from molten zinc. The metal had been placed in a bin and partially hardened. The employee broke through the partially hardened metal; still-molten metal flowed to the employee's steel-toed right boot and entered through the cloth boot tongue. The employee suffered a third-degree burn to the right foot and was hospitalized.
More severe injuries in this industry (NAICS 811310)
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
An employee was climbing a ladder to inspect a vent in a restaurant dining area. The ladder slid out on the floor and the employee fell approximately 12 feet onto the ladder and the floor. He was hospitalized with a dislocated shoulder and a back injury.
An employee was operating a lift truck when it struck a stationary lift truck. His left thumb was pinched between the two lift trucks, resulting in a partial amputation.
An employee was disassembling a pressurized unit using a driver drill. When the unit was disassembled, it caused a kickback from the tube head, causing the drill to strike the employee's left forearm. They sustained a diaphyseal fracture to their left radius and ulna, which required surgery.
After repairing a piece of industrial equipment, an employee had brake-cleaning liquid on his gloves. A lighter ignited the liquid, and the employee's hands were severely burned.
An employee was changing a die in a press when the die slipped and crushed the employee's left index finger. The employee sustained an open facture of the tuft of the left distal phalanx and a partial amputation.
An employee was driving a boom lift (in the lowered position) in an exterior dock area. The lift s left wheels rolled onto base plates that covered a 3-foot-deep sump pit. The base plates failed, and one side of the lift dropped. The employee's left leg was caught under the lift basket, and he suffered a fracture to the lower leg including the ankle.