Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Illinois Tool Work Inc, 805 E Old 56 Hwy, OLATHE, KANSAS 66061
on — Amputations, affecting the finger(s), fingernail(s), n.e.c..
Final narrative
An employee was cleaning the marker machine puck and press assembly when his hand was caught between the press and the puck, amputating his left index finger to the first knuckle.
An employee was lowering a drum using a drum dolly. When the employee released the dolly, the drum and the dolly hit the ground. When the drum made contact with the ground, it kicked the dolly backwards into the employee's right forearm, striking it with the handle. He suffered contusions to the right forearm and elbow, requiring hospitalization.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 325188)
An employee was climbing into the cab of a semi-tractor when he stepped on the battery cover and it shifted from under him, causing him to fall to the ground. The employee sustained a fractured left wrist.
An employee was clearing a product flow restriction when the rotating valve activated. They sustained amputations to their left middle and index fingers.
A panel was being lifted when an attached roller (approximately 20 pounds) slipped and fell about 2 feet onto the hard hat of an employee working below. The roller also struck the employee's shoulder and back. The employee was hospitalized and suffered a contusion to the shoulder/back.
An employee drank water from a water cooler in the control room that was contaminated with sodium nitrite. The employee sustained methemoglobinemia and was hospitalized.
An employee was collecting waste material and taking it to a waste container that was in close proximity to material that was emitting chemical fumes due to elevated temperatures. The employee inhaled the fumes and was admitted to the hospital due to the exposure.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.