Struck by rolling object or equipment-other than powered vehicle, n.e.c. · Bruises, contusions
At a glance
Federal OSHA recorded a severe workplace injury
at Illinois Tool Work Inc, 805 E Old 56 Hwy, OLATHE, KANSAS 66061
on — Bruises, contusions, affecting the elbow(s) and arms(s).
Final narrative
An employee was lowering a drum using a drum dolly. When the employee released the dolly, the drum and the dolly hit the ground. When the drum made contact with the ground, it kicked the dolly backwards into the employee's right forearm, striking it with the handle. He suffered contusions to the right forearm and elbow, requiring hospitalization.
HospitalizedElbow(s) and arms(s)Cart, dolly, hand truck-nonpowered
An employee was cleaning the marker machine puck and press assembly when his hand was caught between the press and the puck, amputating his left index finger to the first knuckle.
An employee was pushing carts into the chute area for customers to retrieve. The first of six carts struck the wall and caused the other carts to bounce back and strike the employee. The carts knocked the employee to the ground and she sustained a back injury.
An employee was loading a portable storage container onto a dovetail trailer. This requires hooking up a bridle to the container and lifting the container enough for the dovetail to begin to slide under it. The employee reached and held the bridle lock to allow the trailer to move under it when the trailer moved backward instead of forward and caught his finger. The employee's right middle finger was amputated between the fingernail and the first knuckle.
An employee was reaching over a small stack of steel billets on the ground to cut a strap. When the strap was cut, one of the billets (weighing 5,182 pounds) rolled down onto his right leg. He was pinned and suffered a broken tibia. The incident occurred while the employee was training.
On June 7, 2023, employees were unloading a box truck and rolling a reel of 2-inch plastic pipe to the back of the truck. As the employees were rolling the reel, the edge of the steel frame of the reel contacted the side of the truck. The injured employee s right little finger was caught between the reel and the truck, resulting in a laceration and fracture as well as a little finger amputation.
Employees were using a dolly to remove a trash compactor unit from a residential home. As they began to transport it out of the room and to the outside, the dolly encountered uneven ground. This caused the dolly and the unit to move quicker than expected. The injured employee's left hand was then caught between a nearby concrete column and the compactor unit, resulting in fractures of the left ring and middle fingers that required amputation.
More severe injuries in this industry (NAICS 325188)
An employee was climbing into the cab of a semi-tractor when he stepped on the battery cover and it shifted from under him, causing him to fall to the ground. The employee sustained a fractured left wrist.
An employee was clearing a product flow restriction when the rotating valve activated. They sustained amputations to their left middle and index fingers.
A panel was being lifted when an attached roller (approximately 20 pounds) slipped and fell about 2 feet onto the hard hat of an employee working below. The roller also struck the employee's shoulder and back. The employee was hospitalized and suffered a contusion to the shoulder/back.
An employee drank water from a water cooler in the control room that was contaminated with sodium nitrite. The employee sustained methemoglobinemia and was hospitalized.
An employee was collecting waste material and taking it to a waste container that was in close proximity to material that was emitting chemical fumes due to elevated temperatures. The employee inhaled the fumes and was admitted to the hospital due to the exposure.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.