Caught in running equipment or machinery during maintenance, cleaning · Amputations
At a glance
Federal OSHA recorded a severe workplace injury
at Amsted Rail Company, Inc., 7111 Griffin Rd., KANSAS CITY, KANSAS 66111
on — Amputations, affecting the fingertip(s).
Final narrative
An employee was troubleshooting a pouring station when the cylinder activated and his right fingertip was caught between the plunger and the stop plate. The flesh on his right index fingertip was amputated (no bone loss). The pouring station was not locked/tagged out at the time of the incident.
An employee was operating a forklift when it nicked the railroad wheels. The employee's left hand was pinched between the forklift and rail wheel, resulting in a partial left finger amputation.
On November 8, 2022, at approximately 3:30 PM, an electrician was on a ladder to replace a pendant on a hoist when the employee contacted a powered terminal and was shocked by 460 volts of electricity. The employee then fell off the ladder and was hospitalized for a burn and fracture.
An employee was cleaning a chute at the hub cutter station and was using a pneumatic chipping gun to remove a piece of steel. The chisel tip on the chipping gun got stuck, and when the piece of steel became free, the employee's finger was caught between the edge of the chute and the falling chipping gun, partially amputating their left index fingertip.
At about 7:45 a.m. on September 13, 2021, an employee was struck by a forklift as it backed up to pick up a stack of wooden pallets. The employee suffered an avulsion injury to the left leg and was hospitalized.
Two employees were repairing the hydraulic engagement pins on a rented front-end wheel loader. The machine controls were activated to move the attachment pins and an employee's finger was caught between the pins and the bushings. Their right index finger was partially amputated.
An employee was cleaning the conveyor on a piece of equipment when they slipped and their right hand was pulled into the chain sprocket. The employee's fifth fingertip was amputated.
An employee was throwing blankets onto a blanket folding and stacking machine. A blanket got stuck in the machine and she attempted to remove it when the machine contacted her right little finger, resulting in a fingertip amputation.
More severe injuries in this industry (NAICS 336510)
An employee was responding to a service request for a cable stripping machine that was making noise and not functioning consistently. While testing its function, the machine contacted the employee s right index fingertip, resulting in a fingertip amputation to the tuft.
An employee was using a handheld cordless electric torque wrench. The tool's reaction arm came into contact with the employee's left hand, causing an amputation to the middle finger above the first knuckle.
On August 6, 2025, an employee was preparing to weld a metal sheet that goes between containers and weighs 800 pounds. The employee was placing a two-foot wooden brace (4 by 4) under the metal, which was being raised by a crane operator using a magnet. The magnet shifted and caused the load to catch the employee's right index fingertip against the wooden brace, resulting in a fingertip amputation.
An employee was climbing up a ladder to the top of a railcar. The employee slipped and fell from the ladder, striking the coupler of the railcar during the fall. This caused the employee's body to shift, and they landed on their head/nose/face. The employee suffered broken ribs, a broken cheekbone, a broken nose, and internal bleeding.
An employee was working to remove a product blockage from a piece of equipment. The employee was struck by a metal bar near the deck of the pin mixer equipment and sustained blunt force trauma to the torso.
An employee was moving a rack onto a lower conveyor in the south heat treat area when their finger got caught between the part tray and the rollers, resulting in a fingertip fracture and amputation.
An employee was climbing a ladder to get on top of the breakroom. The ladder slipped, causing him to fall to the ground. The employee sustained fractures to his upper back, left foot, and ankle.
Two employees were removing a circuit breaker. The injured employee was using wrenches in the removal process. One of the wrenches contacted an adjacent door, resulting in an arc flash. The employee suffered burns to their neck, face, and ear, as well as momentary vision loss due to the flash.
An employee bent over to pick up a rubber mat from the ground. When he grabbed the corner of the mat, a rattlesnake hidden under it bit his left middle finger near the first knuckle. He was hospitalized.