Other jump to lower level less than 6 feet · Fractures
At a glance
Federal OSHA recorded a severe workplace injury
at LaborMax Staffing , Cambridge St., BENTONVILLE, ARKANSAS 72712
on — Fractures, affecting the leg(s), unspecified.
Final narrative
An employee was waterproofing culvert boxes. He was trying to cross a 4.5-foot gap between the boxes when he fell backward to the ground and broke his leg.
An employee was folding linens and moving items at a warehouse where the temperature was 86.5 degrees F. Suffering from heat stress, the employee became dizzy and was hospitalized.
An employee was running conduit below conveyor belts when he went onto a platform and fell approximately 10 feet, breaking his left wrist, five to six right-side ribs, and his right-side pelvis. He was hospitalized. The platform did not have guardrails at the time of the incident.
An employee was opening a door when a strong wind pushed it shut. The tip of the employee's left index finger was trapped between the door and the frame, and was amputated to the first bone.
An employee was cleaning off a pallet sorting machine. The employee jumped approximately two feet from the top of the pallet sorting machine to a lower platform. Upon landing, the employee's left ankle rolled, resulting in a fracture that required hospitalization.
An employee was working from the forth rung of an 8-foot step ladder installing radiator covers when the cover began to fall. The employee lost balance and jumped from the ladder, landing on his feet and sustaining a heel fracture.
An employee was standing on their flatbed truck adjusting a cargo pallet. He pulled one of the pallet boards and the board broke, causing the employee to lose his balance and jump 4 feet off the flatbed. The employee landed on a concrete surface and sustained a fractured left heel that required surgery.
An employee was cleaning a single screen machine that had been jammed by a garden hose. The employee exited the machine onto the belt guard and jumped from the belt guard to the ground three feet below. When he landed, he broke his left femur.
An employee was on a catwalk helping to lay down tubing when he lost his balance. The employee jumped approximately 42 inches to the ground and the 30-foot section of tubing struck his left shin resulting in a fracture that required surgery.
More severe injuries in this industry (NAICS 561320)
A temporary employee was testing an electrical starter motor. He was placing tape on the starter while the breaker was not engaged, but the starter sent an arc flash that burned his hands and stomach.
A temporary employee was rigging secondary steel when the steel joist fell to the ground and struck his lower left leg, resulting in fractures to the tibia and fibula.
A temporary employee was helping set up a stage for a concert. The employee was run over by a mobile cart and sustained a toe amputation. The employee was hospitalized.
The injured employee was operating a reach truck and stopped at an intersection within a warehouse. After a brief a conversation, another employee's reach truck accelerated unexpectedly and struck the injured employee's stationary truck crushing his foot. He sustained fractures to his left foot and toes requiring hospitalization and surgery.
A temporary employee was operating a plastic strapping machine on an assembly line. The machine wrapped the employee, causing crushing injuries to their ribs and a kidney. The employee was hospitalized.
An employee was operating an ironworker (steel punching/shearing) machine. A piece of the tooling broke off and struck the employee's neck; a fragment was lodged in his neck. The employee was hospitalized and required surgery.
On October 25, 2025, an employee was stringing up a new reel of tire tread on a machine. The employee pulled a 6-inch tail and proceeded to spool up the liner. As the machine was jogged to begin the liner wrapping process, the liner caught the employee's glove and pulled their right arm into the liner, causing a fracture to the arm.
An employee was doing a cable change on top of an electric overhead traveling (EOT) crane. They were positioned between the cable drum and the drive shaft. While rotating the cable drum, the employee reached for the new cable that was to be installed. The grease fitting on the drive shaft caught their fall harness and pulled them underneath the drive shaft. The employee was pinned between the drive shaft and two pieces of angle steel, resulting in a fracture to their left hip.
On October 5, 2025, an employee was pulling a pressure washer hose when it it disconnected from the cooker. The employee was struck by jets of high-pressure water, resulting in lacerations to their left thigh requiring surgery. The employee was hospitalized.