105,313Records 71,083Employers 85,290Hospitalizations 27,770Amputations 2015-01-01 2025-10-31
Safety Incidents OSHA Severe Injury Reports · 2015–2025

Spirit Aero Systems, Inc.

Caught in running equipment or machinery during regular operation · Fractures

Federal OSHA recorded a severe workplace injury at Spirit Aero Systems, Inc., 3330 N Mingo, TULSA, OKLAHOMA 74116 on — Fractures, affecting the jaw, chin.

An employee was entering an aircraft hanger through a large rollup door on a powered wheelchair when the door descended on her head. She suffered a fractured jaw and severe lacerations.

Hospitalized Jaw, chin Garage doors

Spirit Aero Systems Inc

An employee was transporting 50,000 lbs. of materials on a cart. The injured employee was standing nearby and the cart ran over their left foot resulting in five broken toes and abrasions.

Spirit Aero Systems Inc

An employee was working on an automatic drill apparatus. A tool was left on top of the machine, and the vibration from the machine started to move the tool. The employee was attempting to grab the tool when the machine cycled again. The employee's left arm was caught in the machine, resulting in a left arm fracture and severe lacerations.

Spirit Aero Systems Inc

An employee was using a power drill with a connected ground wire. The employee was drilling some holes when the wire became wrapped on the drill head. The employee's finger was then caught between the wire and drill, resulting in a left middle fingertip amputation.

Spirit Aero Systems Inc

An employee was coming down a 16-inch lift when he fell, landing on the floor. He suffered back pain and leg weakness.

View Spirit Aero Systems, Inc.'s full OSHA safety record →

Pall Corporation

An employee was operating a machine when a wire pulled his right glove resulting in amputation of the index and middle fingertips.

Koch Foods of Cincinnati

An employee was grinding chicken when their right index fingertip was caught in the grinder and amputated.

Stella-Jones Corporation

An employee was sharpening peeler blades when their shirt was caught in the grinding wheel. The employee sustained tendon damage and a crushed right hand.

Mack Manufacturing, Inc.

An employee was passing through a large metal door when the door closed on the employee, resulting in a cracked rib.

Nutmeg Container Corporation

An employee was preparing to cut lumber on a panel saw when the clamp engaged and caught the employee's left middle finger, resulting in a fingertip amputation.

Textron Aviation Inc. (Orlando Service Center)

A pressurized aircraft nose landing gear strut assembly was being disassembled. The gland nut dislodged under pressure and made contact with an employee's left hand, breaking it.

Spirit Aerosystems, Inc

A metal tooling base was being moved by a forklift when the load shifted. An employee who was assisting went to stabilize the load and prevent it from sliding off the forks. The C-channel of the base crushed the employee's left hand against the concrete ground, resulting in the amputation of their third and fourth fingers.

Spirit Aerosystems Inc.

An employee was working on a tool platform (47.5" tall) and was transitioning around to the other side when they lost balance and fell to the concrete floor. The employee was hospitalized with fractures to seven ribs and their elbow.

Northrop Grumman Corporation

An employee was adjusting the task lighting on a band saw when their right little finger made contact with the blade, resulting in amputation.

Northrop Grumman Corporation

On August 19, 2025, at 6:30 a.m., an employee sat in the rear bench seat of a golf cart ahead of being driven to a parking lot. When the golf cart began to move, he fell off the cart and onto the ground, resulting in a fractured right hip.

Rae Corporation

An employee was helping to move a 1,300-pound coil on a cart. The steel caster hit a crack in the concrete, the weld holding the caster onto the cart broke, and the coil and cart tipped over onto the employee. He was hospitalized with a laceration on his forehead and a pelvic fracture on his right side.

Meeco Sullivan

An employee was cutting a piece of metal rod with a metal cutting machine. His right middle finger became caught between the rod and the machine's table. The employee's fingertip was partially amputated.

Edward Jones Investments

An employee was working at her desk. She went to stand up and fell to the floor beside the desk. The employee sustained a hip displacement and required surgery.

Burgess Manufacturing of Oklahoma Inc.

An employee was processing wood boards at a chop saw when the saw malfunctioned and the blade cut her left hand and fingers. She was hospitalized and her little finger was surgically amputated.